Hobart Champion 10,000 Manual

PROCESSES
Stick (SMAW)
Welding
FEATURES
All-in-one 10,000-watt generator
and 230-amp welder
Innovative Hobart technology
Heavy-duty construction
Lightweight and compact design
Choice of OHV engines
A "no tools" oil change and
standard hour meter
Quick-set current control
Smooth DC weld output
SPECIFICATIONS
(SUBJECT TO CHANGE WITHOUT NOTICE.)
Rated Output
230 amps at 25 V, 210 amps at 25 V,
30% duty cycle 60% duty cycle
Rated output decreases approximately 3.5% per 1000 ft (305 m) above sea level. The rated output of any engine-driven welder/generator decreases as temperatures rise. The ratings for the
Champion 10,000 were taken at high temperatures, only after the machine reached operating temperature. Even in hot weather the Champion 10,000 has the vigor to let you finish the job.
ENGINE SPECIFICATIONS
Engine Brand Horsepower (HP)
Kohler 20 HP at 3600 RPM
#500 434 (3-year mfg. warranty)
Robin 22 HP at 3600 RPM
#500 433 (3-year mfg. warranty)
Hobart Welders
U.S. Distributor Sales
Hobart Retail Sales
Canadian Sales
International Sales
Champion 10,000
All-in-One 10,000-Watt AC Generator and DC Welder
BENEFITS
You get a generator and welder for about what you would pay for just a generator!
Smooth arc starts with minimal "sticking". Extraordinary motor starting characteristics. Strong continuous
rating to run compressors, pumps, lights, hand tools and other equipment.
Provides stamina and long dependable service. Enclosed design, large battery, rugged electrical
connections and wiring, and circuit-breaker protection.
Just over 3 ft long and weighs 10 – 20% less than competitive units.
Modern engines from Robin or Kohler, with 10-gallon fuel tank and low oil pressure shutdown as standard
features. Dependable engines conserve fuel and provide long operation before refueling.
Help maintain scheduled routine oil servicing (every 100 hours) and other preventative maintenance.
Easy to set up and start welding.
Primarily designed for the Stick process, the Champion 10,000 also provides a smooth arc for scratch start
DC TIG welding.
Max. Open-Circuit Voltage Amperage Range
73 VDC 50–230 amps
(SUBJECT TO CHANGE WITHOUT NOTICE.)
Type
Twin-cylinder, 4-cycle, overhead-valve,
industrial, air-cooled, gasoline engine
Twin-cylinder, 4-cycle, overhead-valve,
industrial, air-cooled, gasoline engine
An Illinois Tool Works Company
Phone 920-735-4576 FAX 800-637-2315
Phone 800-332-3281 FAX 937-332-4161
Phone 888-489-9353 FAX 519-421-0480
Phone 920-735-4509 FAX 920-735-4125
C ombining a 10,000-watt generator with a 230-amp
constant-current DC welder, the Champion 10,000
is ideal for farm, general construction, and emergency
power applications. This unit is designed for Stick
welding with quick and easy arc starts. It also performs
general scratch start DC TIG. The Champion 10,000
offers a "no-nonsense" warranty. The engine is
warranted separately by the engine manufacturer.
Comes complete with 15 ft Work Cable and Clamp,
and 20 ft Welding Lead and Electrode Holder!
Auxiliary Power
10,000 watts peak; 120/240 VAC, 60Hz,
9,500 watts continuous while not welding
Weld Speed Idle Speed Fuel Capacity
3750 RPM 2200 RPM 10 gallons
3750 RPM 2200 RPM 10 gallons
211801
May 2005
INDUSTRIAL
Dimensions Net Weight
H: 33 in (838 mm) Kohler:437 lb (198 kg)
W: 18-3/4 in (476 mm) Robin: 439 lb (199 kg)
D: 37-1/2 in (953 mm)
Oil Capacity/Change
1.75 qt (1.7 L) every 100 hours;
2 qt (1.9 L) w/filter every 200 hours
1.6 qt (1.55 L) every 100 hours;
1.8 qt (1.75 L) w/filter every 200 hours
Web Site www.HobartWelders.com