Canon VB-S30D Operation Manual page 150

V420 Could not start intelligent service [crit]
Description intelligent initialization error [%1] [%2] .
(V420)
%1 Error number
%2 Cause of error
Meaning Failed to initialize intelligent service.
Countermeasure If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
V421 Intelligent service error [crit]
Description intelligent working error [%1] [%2] . (V421)
%1 Error number
%2 Cause of error
Meaning An error that does not permit recovery
occurred while intelligent service was
running.
Countermeasure If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Application (Memory Card) Messages
M001 Starting and stopping of SD control module
[info]
Description %1 sdctrl (M001)
%1 Starting or stopping
Meaning The SD control module (sdctrl) has started
or stopped.
M203 Not enough space on memory card [warning]
Description There is not available space (M203)
Meaning Insufficient memory card capacity.
M301 SD control module error [err]
Description %1 process failure (M301)
%1 mount or unmount
Meaning Mount or unmount process failed.
Application (Camera) Messages
C001 Starting and stopping of camera control module
[info]
Description %1 camerad (C001)
%1 starting | stopping
Meaning The camera control module started/
stopped.
150
C002 Camera application started [info]
Description starting cameraappl (C002)
Meaning The camera application started.
C201 Day/Night mode switching warning [warning]
Description Can't switch Day/Night mode, because
current mode is Auto. (C201)
Meaning Could not switch day/night mode.
Countermeasure Set Day/Night mode manually.
C211 Camera control command overflow [warning]
Description command queue overflowed (C211)
Meaning The camera control command queue
overflowed, and some commands were
discarded.
Countermeasure Allow a longer interval (200 ms) for sending
the camera control command.
HTTP Server Messages
H143 User name specification error [notice]
Description (http_auth.c.XXX) get_password failed,
IP:%1 (H143)
%1 IP address
Meaning An unknown user was specified in user
authentication.
H144 Password specification error [notice]
Description (http_auth.c.XXX) password doesn't match
for %1 username%2, IP:%3 (H144)
%1 URL XSS vulnerability countermeasure
implementation (process equivalent to ftpd)
%2 User Name
%3 IP address
Meaning A wrong password was specified in user
authentication.
H201 Timeout disconnect [warning]
Description a request for %1 timed out after writing %d
seconds (H201)
%1 Request URI
%d 360 (Timeout time)
Meaning Disconnected due to HTTP server timeout
(360 sec.).