Download Print this page
Hide thumbs Also See for VB-S910F:

Advertisement

Quick Links

BIE-7203-000
ENGLISH
Network Camera
/
/

Installation Guide

Please be sure to read the "Safety Precautions" section for
correct use. After reading this Installation Guide, keep it in a
readily accessible location for future reference. This camera
is for indoor use only.
* Some cameras are not available in certain countries or regions.
WARNING
To reduce a risk of fire or electric shock, do
not expose this product to rain or moisture.
Caution
Request a professional installer for all installation
work. Never try to install the camera yourself.
Doing so may result in unforeseen accidents
such as dropping the camera or electric shock.
Check Included Items
Camera
Warranty Card
Installation Guide (This document)
Symbols Indicating Camera Model
: VB-S910F
: VB-S900F Mk II/VB-S905F Mk II
© CANON INC. 2017
Printed in Taiwan
Part Names
Serial_ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
1
2
3
MAC_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
1. Mounting Screw Hole (a 1/4-20 UNC mounting screw less than
5.5 mm (0.22 in.) in length will fit the screw hole)
2. Microphones
3. Lens
The contents of this guide are subject to change without any prior
notice.
4
5
9
6
9
7
8
4. Memory card slot cover
5. 100Base-TX LAN connector
6. External device I/O terminal
7. Audio output terminal
8. Reset switch (please refer to the "Operation Guide")
9. LED
10. Audio input terminal
External Dimensions
*1
69.9 (2.75)
32 (1.26)
117 (4.61)
11.4 (0.45)
*1 tripod screw holes
67 (2.64)
11.4 (0.45)
32 (1.26)
114 (4.49)
Installing the Camera
4
5
1
6
10
8
Weight: Approx. 180 g (6.4 oz.)
(camera only)
a. Mounting pole
b. Mounting screw hole
Example installations
Using a ceiling
mounting pole
Using a wall mounting pole
2
d
Unit: mm (in.)
LED
: When powered on, during reboot,
during normal use
: When [Turn Off] is selected
(please refer to the "Operation Guide")
c. LAN cable
d. LED
3
Set the camera angle
Please manually adjust the camera angle while checking the
video on a computer (please refer to the "Operation Guide").
Unit : mm (in.)
If Using a Memory Card
a
b
e. Memory Card Slot
To remove the memory card, push it in all the way until the card
slightly pops out and remove.
Important
c
Insert a memory card before installing the camera.
Only for European Union and EEA (Norway,
Iceland and Liechtenstein)
If a chemical symbol is printed beneath the symbol shown
above, in accordance with the Battery Directive, this indicates
Please refer to the
that a heavy metal (Hg = Mercury, Cd = Cadmium, Pb = Lead)
reverse side of this
is present in this battery or accumulator at a concentration
guide for details.
above an applicable threshold specified in the Battery Directive.
This product should be handed over to a designated
collection point, e.g., on an authorized one-for-one basis
when you buy a new similar product or to an authorized
collection site for recycling waste electrical and electronic
equipment (EEE) and batteries and accumulators. Improper
handling of this type of waste could have a possible impact
on the environment and human health due to potentially
hazardous substances that are generally associated with EEE.
Your cooperation in the correct disposal of this product will
contribute to the effective usage of natural resources.
For more information about the recycling of this product,
please contact your local city office, waste authority, approved
scheme or your household waste disposal service or visit
www.canon-europe.com/weee, or www.canon-europe.com/
battery.
e
These symbols indicate that this
product is not to be disposed of with
your household waste, according to the
WEEE Directive (2012/19/EU), the Battery
Directive (2006/66/EC) and/or national
legislation implementing those Directives.

Advertisement

loading

Summary of Contents for Canon VB-S910F

  • Page 1: Installation Guide

    Symbols Indicating Camera Model To remove the memory card, push it in all the way until the card : VB-S910F : VB-S900F Mk II/VB-S905F Mk II slightly pops out and remove. © CANON INC. 2017 Printed in Taiwan Important 69.9 (2.75) Part Names Insert a memory card before installing the camera.
  • Page 2: Installation Precautions

    Max. 4.8 W loosening, in order to prevent injuries and equipment 10 kΩ 10 kΩ Canon will assume no liability for any accident or damage Max. 4.3 W damage due to falling items. – Class 2 power sourcing equipment Input terminal resulting from use of the camera under the conditions 0.1 µF...

This manual is also suitable for:

Vb-s900f mkiiVb-s905f mkii