Bosch 0 275 007 025 Owner's Manual page 28

English–28
Technical Data
Battery Charger
Article number
Rated voltage
Frequency
Output voltage
Charging current
Permitted charging temperature
range
Charging time
Number of battery cells
Operating temperature
Storage temperature
Weight according to
EPTA-Procedure 01/2003
Degree of protection
This device is in compliance with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device must not cause harmful interference, and
(2) this device must accept any interference that is received, in-
cluding interference that may cause undesired operation.
This device is in compliance with CAN ICES-3(B)/NM B-3(B).
Operation
Initial Operation
Connecting the Charger to Household Electricity
 Note the household voltage! The voltage of the power
supply must correspond to the specifications given on
the battery charger nameplate.
Plug the charger plug C3 of the power cord into the charger
socket C2 of the charger.
Connect the power supply cable (country-specific) to the
household electricity supply.
0 276 001 SPUen | (23.4.14)
Charger
0 275 007 906
V~ 100...230
Hz 50...60
V 36
A 4
°F +32...+104
h 3.5
30 –40
°F +32...+104
°F +14...+122
lb 1.8
IP 40
C2
C3
Charging the Removed Battery
A8
C6
C5
C5 Charge connector
C6 Socket for charge connector
A2 Rack-type battery pack
A3 Battery charge-control indicator
A4 Battery On/Off button
A8 Standard battery pack
Switch the battery pack off and remove it from the holder of
the eBike. To do this, read and follow the operating instruc-
tions for the battery pack.
 Put the battery pack down only on clean surfaces. In
particular, avoid getting the charge socket and the con-
tacts dirty, e. g., with sand or soil.
Insert the charger plug C5 for the battery charger into the
socket C6 on the battery pack.
A3
A2
C6
Bosch eBike Systems
A4