Bosch 0 275 007 025 Owner's Manual page 12

English–12
Notice: For individual versions, it is possible that the assis-
tance level is preset and cannot be changed. It is also pos-
sible that fewer assistance levels are available for selection
than listed here.
The following assistance levels (max.) are available:
– "OFF": The motor assistance is switched off, the eBike
can be operated as a normal bicycle through pedaling.
– "ECO": Effective assistance at maximum efficiency for
maximum cruising range
– "TOUR": Uniform assistance, for touring with long cruis-
ing range
– "SPORT": Powerful assistance for sporty off-road rid-
ing, as well as for urban traffic
– "TURBO": Maximum assistance, supporting the highest
speed for sporty riding
To increase the assistance level, press the "+" button 13
on the operating unit until the desired assistance level is
displayed in indicator b; to decrease the assistance level,
press the "–" button 12.
14
13
The requested motor output is displayed in indicator a. The
maximum motor output depends on the selected assis-
tance level.
Assistance Level
"ECO"
"TOUR"
"SPORT"
"TURBO"
* The motor output can vary for individual versions.
If you switch the eBike system on or place the display unit
when it is switched off into the holder, then the assistance
level is reset to "OFF".
0 276 001 SPUen | (23.4.14)
10
11
12
Assistance Factor*
(Derailleur)
50 %
120 %
190 %
275 %
WARNING: If you remove the display unit when it is
switched on from the holder and again put it back without
turning it off, then the last set assistance level remains and
is not reset to "OFF".
Switching the Lighting On/Off
If your lights are set up to be powered by the eBike system,
then you can use the 2 button on the display unit to simulta-
neously switch the front light and rear light on and off.
When the lighting is switched on, "Lights on" appears and
when the lighting is switched off, "Lights off" appears for
approx. 1 s in the text indicator d. The light symbol c is dis-
played when the light is on.
Switching the driving light on and off has no effect on the
backlighting for the display. The backlighting for the display
is active as soon as the system or the display is switched on.
Speed and Distance Indicator
The speed indicator f always displays the current speed.
The following functions are available in the function indi-
cator (combination of text indicator d and value
indicator e):
– "Range": Estimated range of the available battery pack
charge (for constant conditions such as assistance lev-
el, route profile, etc.)
– "Distance": Distance covered since the last reset
– "Trip time": Trip time since the last reset
– "Avg. Speed": Average speed achieved since the last
reset
– "Max. Speed": Maximum speed achieved since the last
reset
– "Clock": Current time
– "Odometer": Display of the total distance traveled with
the eBike (cannot be reset)
To switch between the indication functions, press the "i"
button 1 on the display unit or the "i" button 11 on the op-
erating unit until the desired function is displayed.
To reset "Distance", "Trip time" and "Avg. Speed",
switch to any of the three functions and then press and hold
the "RESET" button 6 until the indicator is set to zero. This
also resets the values for the other two functions.
To reset the "Max. Speed", switch to this function and
then press and hold the "RESET" button 6 until the indica-
tor is set to zero.
To reset "Range", switch to this function and then press
the "RESET" 6 button until the display is reset to the value
of the factory setting.
When the diplay unit is removed from the holder 4, all func-
tion values remain stored and can be viewed.
Bosch eBike Systems