Bosch 0 275 007 025 Owner's Manual page 24

English–24
Inserting and Removing the Battery Pack
A6
A5
A8
A9
A6
A5
 Always switch the battery pack off when inserting or
removing it from the holder.
In order for the battery pack to be inserted, the key A5 must
be inserted into the lock A6 and the lock must be unlocked.
To insert the standard battery pack A8, place it with the
contacts on the lower holder A9 on the eBike (the battery
pack can be inclined up to 7° to the frame). Tilt it into the
upper holder A7 until it engages.
To insert the rack-type battery pack A2, slide it with the
contacts facing ahead until it engages in the holder A1 of
the rear rack/carrier.
 Always check that the battery pack is locked in
place. To do this, pull on the battery pack handle (after
the key has been removed).
0 276 001 SPUen | (23.4.14)
A7
7°
A1
Check if the battery pack is tightly seated. Always lock the
battery pack with lock A6; otherwise the lock can open and
the battery pack could fall out of the holder.
After locking, always remove the key A5 from the lock A6.
This prevents the key from falling out and the battery pack
from being removed by unauthorized persons when the
eBike is parked.
To remove the standard battery pack A8, switch it off and
unlock the lock with the key A5. Tilt the battery pack out of
the upper holder A7 and pull it out of the lower holder A9.
To remove the rack-type battery pack A2, switch it off
and unlock the lock with the key A5. Pull the battery pack
out of the holder A1.
A2
Bosch eBike Systems