Removing The Carrier Mechanism - JVC MC-8100U Service Manual

MC-8100U
2.1.6

Removing the Carrier Mechanism

1. Open the door. (Refer to 2.1.2.)
2. Remove the side stay R. (Refer to 2.1.5.)
3. Remove the #1 and #2 magazines. (Refer to 2.1.3.)
4. Remove the three screws
5. Hold the carrier mechanism by the bottom ass'y and move it
to a position approx. 5 cm lower than the mail slot. (Pay at-
tention during this operation because the carrier mechanism
is very heavy.)
Mail slot
2-5
3
.
Carrier mechanism
6. Remove the carrier mechanism upward.
7. Turn the carrier mechanism upside down, and remove a screw
4
. retaining the flat cable mounting bracket.
8. Release the flat cable connector lock and disconnect the flat
cable to remove the carrier mechanism.
Note:
Pay attention not to damage the lock of the flat cable con-
nector
3
Bracket
4