Assembling the elite Panaboard
Note
•
There are 2 types of lower frame covers for the
elite Panaboard: a lower frame cover made
from 2 parts and a lower frame cover made from
1 part.
If you will be mounting elite Panaboard on a
wall, the assembly procedure will differ
depending on the type of lower frame cover.
Follow the steps below:
2
When the lower frame cover is secured with 4
screws (2 parts) ® Page 41
When the lower frame cover is secured with 2
screws (1 part) ® Page 43
For Wall Mounting (with 2-part lower
frame cover)
1.
Remove the screw (A) of the attachment cover
(B), which is fixed to the attachment board, and
slide the attachment cover down.
Ensure that the attachment cover and the screw
hole (C) of the board attachment are aligned.
2
1
After unscrewing the attachment cover screws (A),
fix them in the holes after sliding the attachment
cover down, as shown in the right-sided illustration
above.
2.
Hang the elite Panaboard on the wall mounting
plates with the screw heads.
Installation Manual
1
2
Operating Instructions (For Basic Operations)
1
3
41