Yamaha CLP- 585 Owner's Manual page 58

Recording Your Performance
• PunchOut
The data after the point you stop recording will remain.
3.
Press the [SONG] button to call up the Song display.
4.
Specify the start point you wish to re-record.
Use the [ ]/[ ] buttons to highlight the measure number, then use the
[<]/[>] buttons to move the playback position (measure number) to the
desired point. As another method, press the [ / ] (Play/Pause) button to
start playback, then press the [ / ] button again slightly prior to the
desired point.
If necessary, select the settings (Voice and other parameters).
Select the desired settings, if you wish to change the previous ones.
5.
Press and hold the [] (Record) button for a second to call
up the display which lists the Recording Target Songs, then
select the 4th item (Song selected in step 1), then press the
[>] button to enter the recording mode.
6.
Press the [ ] button to highlight Track, then use the [<]/
[>] buttons to select a Track for re-recording.
7.
Play the keyboard or press the [ / ] (Play/Pause) button
to start recording.
8.
Press the [] (Stop) button to stop recording.
9.
Save the recorded performance by following step 5 on
page 54.
This operation exits from the Recording mode.
10.
To hear the recorded performance, press the [ / ] (Play/
Pause) button.
58
CLP-585/575/545/535/565GP Owner's Manual
NOTE
The time signature cannot be
changed when replacing the
part of an existing Song.