Yamaha CLP- 585 Owner's Manual page 115

2-1.
Align the screw holes on the upper side of B
with the bracket holes on D and E, then
attach the upper corners of B to D and E by
finger-tightening two thin screws (4 × 12
mm).
2-2.
Secure the bottom end of B using four
tapping screws (4 × 20 mm).
2-3.
Securely tighten the screws on the top of B
that were attached in step 2-1.
3.
Mount A.
Be sure to place your hands at least 15 cm away
from either end of the main unit when positioning
it.
Align the screw holes.
A
At least 15 cm
CAUTION
• Be extra careful not to drop the main unit or let your fingers be
pinched by it.
• Do not hold the main unit in any position other than the position
specified above.
4.
Secure A.
4-1
4-1.
Adjust the position of A so that the left and
right ends of A will project beyond D and E
equally (as seen from the front).
4-2.
Secure A by tightening six thick screws (6 ×
20mm) from the front.
5.
Connect the pedal cord and power
cord.
5-4
CLP-585/575/545/535/565GP Owner's Manual
Assembling the Clavinova
A A
A A
4-2
5-1
5-3
5-2
115