Yamaha CLP- 585 Owner's Manual page 54

Recording Your Performance
5.
If you want to save the recorded performance, press the [>]
button to execute the Save operation while "Save" is
highlighted.
After the Save operation is completed, the display shows "Save
Completed" then returns to the Song display.
• If you are not satisfied with your performance and want to record
again, highlight the cursor to "Retry" then press the [>] button. Try
recording again from step 3.
• If you do not want to save the recorded data, highlight "Cancel" then
press the [>] button.
Track Data Status
You can check whether or not each Track contains recorded data.
Appears when the track contains data.
6.
To hear the recorded performance, press the [ / ] (Play/
Pause) button.
The recorded Song will be named "USERSONGxxx" (xxx: number) and
saved in the "User" category.
7.
To record another Track, enter the Song Recording mode
again.
7-1.
Press and hold the [] (Record) button for a second.
The Recording Target Songs will be listed on the display.
7-2.
Use the [ ] button to select existing MIDI Song (at the
bottom of the list), then press the [>] button.
8.
Record your performance to another track by repeating
steps 2 – 6 of this section.
In step 2, select a track which has no recorded data. In step 3, play the
keyboard while listening to the already recorded data.
54
CLP-585/575/545/535/565GP Owner's Manual
NOTICE
The recorded MIDI Song will be
lost if you change to another
Song or you turn the power off
without executing the save
operation.
Renaming the recorded
Song
The recorded Songs are
named automatically, but you
can rename Songs as desired
(page 66).