Using The Metronome - Yamaha CLP- 585 Owner's Manual

Using the Metronome

The instrument has a built-in metronome (a device that keeps an accurate
tempo)—a convenient tool for practice.
2
1, 4
1.
Press the [METRONOME/RHYTHM] button (or the
[METRONOME] button on the CLP-535/565GP) to start
the metronome.
The Metronome display is shown.
2.
Press the [<]/[>] buttons to adjust the tempo.
While the tempo value is highlighted, you can adjust the tempo value
(number of beats per minute) using the [<]/[>] buttons. If the tempo
value is not highlighted, press the [ ] button to highlight the tempo, then
set the value. To reset the tempo to the default setting, press the [<] and
[>] buttons simultaneously.
The Metronome display closes automatically after a few seconds, if no
operation is carried out.
3.
Press the [EXIT] button to close the Metronome display.
If you want to call up the Metronome display while maintaining
metronome playback, press and hold the [METRONOME/RHYTHM]
button (or the [METRONOME] button on the CLP-535/565GP) for a
second.
4.
Press the [METRONOME/RHYTHM] button (or the
[METRONOME] button on the CLP-535/565GP) to stop
the metronome.
3
Time Signature
Tempo value
Playing Various Musical Instrument Sounds (Voices)
NOTE
The Metronome display cannot
be called up while a display
other than Voice or Song is
shown, or while a Song is
playing back or being paused
temporarily, or while the
instrument is in the Song
Recording mode.
NOTE
You can set the metronome
volume, BPM and so on via the
Metronome Menu display
(page 87).
CLP-585/575/545/535/565GP Owner's Manual
35