Replacing Lan Cards / Iscsi Hbas; Replacing Sas Cards - Fujitsu ETERNUS DX60 S2 User Manual

Chapter 6 Maintenance
6.2 Changing the Connection Destination (Host Bus Adapters)
6.2.2

Replacing LAN Cards / iSCSI HBAs

The procedure to replace a LAN card / iSCSI HBA is as follows:
Procedure
1
2
3
6.2.3

Replacing SAS Cards

The procedure to replace a SAS card is as follows:
Procedure
1
2
2-1
2-2
3
3-1
3-2
4
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Operation-
Turn off the server for which the LAN card or iSCSI HBA is to be replaced.
Replace the LAN card / iSCSI HBA.
For details of the replacement procedure, refer to the manuals supplied with the LAN card
or iSCSI HBA.
When the setting is complete, confirm that the server can access the ETERNUS
DX Disk storage system.
Before replacing a SAS card, use ETERNUS Web GUI or ETERNUS CLI to
check the SAS address or host affinity of the SAS card that is to be removed,
and record this setting for later use.
Replace the server-side SAS card.
Turn off the server for which the SAS card is to be replaced.
Replace the SAS card.
For details of the replacement procedure, refer to the manuals supplied with the SAS
card.
Adjust the settings as necessary, using the ETERNUS Web GUI or ETERNUS
CLI.
Delete the setting of SAS address or host affinity set to the removed SAS card.
Referring to the information recorded in
address or host affinity of the new SAS card in the ETERNUS DX Disk storage system.
When the setting is complete, confirm that the server can access the ETERNUS
DX Disk storage system.
Copyright 2014 FUJITSU LIMITED
Step 1, set the information such as SAS
77
End of procedure
End of procedure
P3AM-5512-07ENZ0