Chapter 5 Installing Optional Products
5.1 Installing Disks
5.1.2
Installable Disks
For installable disks, refer to "Product List".
5.1.3
Disk Handling Instructions
■
About condensation
■
About static electricity
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Operation-
Do Not
WARNING
•
System disks are installed in Slot#0 and Slot#1 of the controller
enclosure. Never remove system disks. Doing so will render the
ETERNUS DX Disk storage system unusable.
Do
CAUTION
•
When moving a disk from a cold place, such as an un-conditioned
store house in winter, to a warmer places such as an air-conditioned
room, the severe temperature change may result in condensation
forming.
To avoid this, allow the packed disks sufficient time in the warmer
place (one hour for each 15C of temperature difference) to adapt to
the new temperature.
Do Not
CAUTION
•
Do not touch the surface of the board of the disks.
Do
•
When handling disks, make sure to wear a wrist strap or touch a metal
part to discharge the human body's natural static electricity. Failure to
discharge static electricity may cause device failure.
•
Leave the disk in its package until ready to install it.
Copyright 2014 FUJITSU LIMITED
57
P3AM-5512-07ENZ0