Fujitsu Eternus DX80 S2 Hardware Installation page 18

Power On Procedure (3)

Drive Enclosure LEDs
LINE LED

AC power is supplied to the Drive Enclosure
FAULT LED

Constant amber when a failure is detected
in the Drive Enclosure
POWER LED

The Drive Enclosure is operating normally
DE-ID (7-segment)

Shows a 2-digit Drive Enclosure ID

Is assigned automatically by the SAS
backend cabling
Hardware Installation ETERNUS DX80 S2 and DX90 S2 17 Copyright Fujitsu Technology Solutions, Release August 2011
2.5" Drive Ecnlosure
3.5" Drive Ecnlosure