Power On Procedure - Fujitsu Eternus DX80 S2 Hardware Installation

Power On Procedure (1)


The ETERNUS DX S2 systems can be Powered On directly
from the Controller Enclosure

Push the Power Switch
• The "Power" LED of the CE switches on
• The power on sequence takes about 2 minutes
• If everything is OK, the green Ready LED in
the CE and the green Power LED in the DE
switch on
Power O
Fault O
Active O
Power
Ready
Fault
Maint/ID O
Cache
Hardware Installation ETERNUS DX80 S2 and DX90 S2
O
O
O
O
15 Copyright Fujitsu Technology Solutions, Release August 2011