Chapter 1 Workflow - Fujitsu ETERNUS DX80 S2 Configuration Manual Server Connection

Chapter 1
Workflow
This manual is used when performing the setup procedures described in the "Setting Up the ETERNUS DX"
section of the "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS)" for each OS.
Required Documents
ETERNUS Web GUI User's Guide
•
Workflow
Setting the SAS Port Parameters
Set the to-server connection type.
"2.1.1 Setting the To-server Connection Type (Setting the SAS Port Parameters)" (page 8)
•
Setting the LUN Groups
Set the server accessible LUN groups.
"2.1.2 Creating the Server Accessible LUN Groups (Setting the LUN Groups)" (page 8)
•
Setting the Host Responses
Set the host responses to match the connection configuration.
"2.1.3 Setting the Host Responses" (page 9)
•
6
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-
Copyright 2014 FUJITSU LIMITED
P3AM-5352-11ENZ0