Dc Voltage Measurements - Craftsman 82315 Owner's Manual

DC VOLTAGE MEASUREMENTS

CAUTION: Do not measure DC voltages if a motor on the circuit is
being switched ON or OFF. Large voltage surges may occur that
can damage the meter.
1. Set the function switch to the
VDC position.
2. Insert the black test lead
banana plug into the negative
COM jack.
Insert the red test lead
banana plug into the positive
V jack.
3. Touch the black test probe tip
to the negative side of the
circuit.
Touch the red test probe tip
to the positive side of the
circuit.
4. Read the voltage in the
display.
17