Dc Voltage Measurements - Craftsman 82312 Owner's Manual

DC VOLTAGE MEASUREMENTS
CAUTION: Do not measure DC voltages if a motor on the circuit
is being switched ON or OFF. Large voltage surges may occur
that can damage the meter.
1. Set the function switch to the
highest VDC position.
2. Insert the black test lead
banana plug into the negative
COM jack.
Insert the red test lead
banana plug into the positive
V jack.
3. Touch the black test probe tip
to the negative side of the
circuit. Touch the red test
probe tip to the positive side
of the circuit.
4. Read the voltage in the
display. Move the function
switch to successively lower
VDC positions to obtain a ÷
higher resolution reading. "_ I' I' _0
15