Strebel CIS Installation Instructions Manual

BOILER INSTALLATION INSTRUCTIONS FOR
INSTALLATION INSTRUCTIONS
General Instructions:
The STREBEL CIS & CIS boilers are special boilers for light oil or gas-
fired (forced) burners. They can be fitted in hot water heating
installations or low pressure steam installations, depending on the type.
Operating Conditions:
Hot water Heating installations boiler type
Maximum high limit temperature 110ºC
Maximum Operating Temperature 95°C
Maximum working pressure 4 bar
Please note all relevant instructions when assembling the boilers.
The Installation: The connecting and initial setting in operation should
be carried out by a qualified heating specialist.
The boiler base is to be constructed in accordance with our diagrams.
Advantages of the STREBEL CIS AND CISM:
1. Long life of cast iron boiler body.
2. High efficiency of operation. Efficiency of combustion is higher
than 90.5 % for all kinds of fuels.
3. Possibility of delivery with burner.
4. Modern design.
5. Signalling of operation and defect of boiler.
6. It is possible to order a special variation of the boiler allowing a
water temperature of 115ºC (standard delivery is with boiler
water temperature up to 95ºC).
7. The ability to use a modular arrangement of connection.
8. Delivery fully assembled or in part form according to customer
requirements is available.
9. Door can be mounted to swing from either side (must be
specified in order).
10. Easily visible sight glass for viewing flame or
combustion chamber pressure.
STREBEL CIS
STREBEL CISM
for reading
STREBEL CIS BOILERS
STREBEL CISM BOILERS
STREBEL CIS BOILER
V.1 - 03.08