Sharp MX-C312 Operation Manual page 155

15
Select the machine configuration.
If you selected [Auto Select] in (3) of step 14, the machine configuration is detected and automatically configured. Check the
configured settings to make sure they are correct.
(1) Select [Installable Options].
If you are using Mac OS X v10.5 - 10.5.8, v10.6 - 10.6.5 or v10.7 - 10.7.3, it does not appear.
(2) Select the options that are installed on the machine.
16
(3) Click the [Apply Changes] button.
If you are using Mac OS X v10.5 - 10.5.8, v10.6 - 10.6.5 or v10.7 - 10.7.3, click the [OK] button.
(4) Click to close the window.
You can check the options that are installed on the machine by printing out the "All Custom Setting List" in the system
settings. (However, note that "Input Tray Options" must be set to the number of trays on the machine.) The "All
Custom Settings List" can be printed from [List Print (User)] in the system settings.
This completes the configuration of the printer driver.
Printing using the IPP function
The machine can print using the IPP function. When the machine is in a remote location, this function can be used in
place of the fax function to print a higher than a fax. If you wish to use the IPP function, follow these steps to select the
PPD file when configuring the printer driver (step 14 on page 1-113).
BEFORE USING THE MACHINE
Display printer information.
(2)
(1) Click the machine's name.
(1)
If you are using Mac OS X v10.5 - 10.5.8, v10.6 - 10.6.5
or v10.7 - 10.7.3, click the [Options & Supplies] button,
click the [Driver] tab and go to step 16.
(2) Click [Show Info].
(1) Click the [IP Printer] icon.
If you are using Mac OS X v10.5 - 10.5.8, v10.6 - 10.6.5
or v10.7 - 10.7.3, click the [IP] icon.
(1)
(2) Select [Internet Printing Protocol] in
"Protocol". Enter the address of the
(2)
machine (IP address or domain name) and
the queue name.
Enter "ipp" in "Queue".
(3) Select [Sharp] in "Print Using" and click the
PPD file of your model.
(3)
If you are using Mac OS X v10.5 - 10.5.8, v10.6 - 10.6.5
or v10.7 - 10.7.3, select [Select a driver to use] (or [Select
(4)
Printer Software]) from "Print Using" and click the PPD file
for your model.
(4) Click the [Add] button.
The "Installable Options" screen will appear. Make sure
that the settings are correct and click the [Continue]
button.
☞
Start Guide "Checking the IP address"
1-114
Contents