Sharp MX-C381 Software Setup Manual
Sharp MX-C381 Software Setup Manual

Sharp MX-C381 Software Setup Manual

Digital full colour multifunctional system
Hide thumbs Also See for MX-C381:
Table of Contents

Advertisement

Quick Links

DIGITAL FULL COLOUR MULTIFUNCTIONAL SYSTEM
Software Setup Guide
Software Setup Guide
Software Setup Guide
Please keep this manual as the information mentioned
below is very important.
Sharpdesk Serial Numbers
This product can only be installed on a number of
computers equal to the number of licenses. Any
additional computers will require additional licenses.
Keep this manual close at hand for reference
whenever needed.
BEFORE INSTALLING
THE SOFTWARE
SETUP IN A WINDOWS
ENVIRONMENT
SETUP IN A MACINTOSH
ENVIRONMENT
TROUBLESHOOTING
Sharpdesk
Sharpdesk
Sharpdesk
Installation Guide
Installation Guide
Installation Guide
MX-C310
MODEL:
MX-C311
MX-C380
MX-C381
MX-C400

Advertisement

Table of Contents
loading

Summary of Contents for Sharp MX-C381

  • Page 1 Keep this manual close at hand for reference whenever needed. MODEL: BEFORE INSTALLING THE SOFTWARE SETUP IN A WINDOWS ENVIRONMENT SETUP IN A MACINTOSH ENVIRONMENT TROUBLESHOOTING Sharpdesk Sharpdesk Sharpdesk Installation Guide Installation Guide Installation Guide MX-C310 MX-C311 MX-C380 MX-C381 MX-C400...
  • Page 2: Software License

    • Aside from instances provided for by law, SHARP is not responsible for failures occurring during the use of the product or its options, or failures due to incorrect operation of the product and its options, or other failures, or for any damage that occurs due to use of the product.
  • Page 3: Table Of Contents

    TABLE OF CONTENTS BEFORE INSTALLING THE SOFTWARE CD-ROMS AND SOFTWARE ..........2 •...
  • Page 4: Before Installing The Software

    BEFORE INSTALLING THE SOFTWARE This chapter describes the software programs that allow you to use the printer and scanner functions of the machine, the CD-ROMs that contain the software, and the pages where the installation procedures can be found. CD-ROMS AND SOFTWARE The software that can be used with the machine is on the CD-ROMs that accompany the machine and the expansion kits.
  • Page 5 - PPD driver The PPD driver enables the machine to use the standard Windows PS printer driver. ☞ WHEN THE MACHINE IS CONNECTED TO A NETWORK (page 10) ☞ WHEN THE MACHINE WILL BE CONNECTED WITH A USB CABLE (page 22) •...
  • Page 6: Other Cd-Roms

    CD-ROMS AND SOFTWARE Software for Macintosh • PPD file This is the printer description file which enables the machine to be used as a PostScript 3 compatible printer. ☞ MAC OS X (page 50) ☞ MAC OS 9.0 - 9.2.2 (page 60) •...
  • Page 7: Verifying System Requirements

    VERIFYING SYSTEM REQUIREMENTS SYSTEM REQUIREMENTS Before installing the software described in this manual, make sure that your computer satisfies the following requirements. Operating Windows 98, Windows Me, system Windows NT Workstation 4.0 (Service Pack 5 or later)* , Windows 2000 Professional, Windows XP Professional, Windows XP Home Edition, Windows 2000 Server, Windows Server 2003, Windows Vista,...
  • Page 8: Software Requirements

    VERIFYING SYSTEM REQUIREMENTS SOFTWARE REQUIREMENTS The following requirements must be met to use the software described in this manual. Operating system Software environment* Windows PCL6 printer driver, PCL5c printer driver PS printer driver, PPD driver PC-Fax driver* Scanner driver Printer Status Monitor Printer Administration...
  • Page 9: Connecting The Machine

    CONNECTING THE MACHINE CONNECTING TO A NETWORK To connect the machine to a network, connect the LAN cable to the machine's network connector. Use a shielded LAN cable. After connecting the machine to a network, be sure to configure the IP address and other network settings before installing the software.
  • Page 10: Setup In A Windows Environment

    SETUP IN A WINDOWS ENVIRONMENT This section explains how to install the software and configure settings so that the printer and scanner function of the machine can be used with a Windows computer. For users of Windows 98/Me/NT 4.0 The CD-ROM does not include software for Windows 98/Me/NT 4.0. Contact your dealer or nearest authorised service representative if you want software for Windows 98/Me/NT 4.0.
  • Page 11 OPENING THE SOFTWARE SELECTION SCREEN (FOR ALL SOFTWARE) The "SOFTWARE LICENSE" window will appear. Make sure that you understand the contents of the license agreement and then click the [Yes] button. You can show the "SOFTWARE LICENSE" in a different language by selecting the desired language from the language menu.
  • Page 12: Installing The Printer Driver / Pc-Fax Driver

    INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER To install the printer driver or the PC-Fax driver, follow the appropriate procedure in this section depending on whether the machine is connected to a network or connected by USB cable. ☞ WHEN THE MACHINE WILL BE CONNECTED WITH A USB CABLE (page 22) WHEN THE MACHINE IS CONNECTED TO A NETWORK This section explains how to install the printer driver and the PC-Fax driver...
  • Page 13: Standard Installation

    Standard installation When the software selection screen appears in step 6 of "OPENING THE SOFTWARE SELECTION SCREEN (FOR ALL SOFTWARE)" (page 8), perform the steps below. Click the [Printer Driver] button. To install the PC-Fax driver, click the [PC-Fax Driver] button on the "Disc 2"...
  • Page 14 INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER • Machine connection method: LPR Direct Print (Auto Search) • Set as default printer:Yes (excluding the PC-Fax driver) • Printer driver name: Cannot be changed • Display fonts: Installed If you selected [Custom installation], select [LPR Direct Print (Auto Search)] and click the [Next] button.
  • Page 15 When the printer driver selection window appears, select the printer driver to be installed and click the [Next] button. Click the checkbox of the printer driver to be installed so that a checkmark ( ) appears. • When the PC-Fax driver is being installed, this screen does not appear. Go to the next step.
  • Page 16 INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER Follow the on-screen instructions. Read the message in the window that appears and click the [Next] button. Installation begins. • If you are using Windows Vista/Server 2008 If a security warning window appears, be sure to click [Install this driver software anyway].
  • Page 17 Installation by specifying the machine's address When the machine cannot be found because it is not powered on or otherwise, installation is possible by entering the name (host name) or IP address of the machine. When the software selection screen appears in step 6 of "OPENING THE SOFTWARE SELECTION SCREEN (FOR ALL SOFTWARE)"...
  • Page 18 INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER When you are asked how the printer is connected, select [LPR Direct Print (Specify Address)] and click the [Next] button. Enter the name (host name) or IP address of the machine and click the [Next] button.
  • Page 19 When the printer driver selection window appears, select the printer driver to be installed and click the [Next] button. Click the checkbox of the printer driver to be installed so that a checkmark ( appears. *The screen shows the installer for the MX-C311/C381. •...
  • Page 20 INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER Follow the on-screen instructions. Read the message in the window that appears and click the [Next] button. Installation begins. • If you are using Windows Vista/Server 2008 If a security warning window appears, be sure to click [Install this driver software anyway].
  • Page 21 Printing using the IPP function and the SSL function The IPP function can be used to print to the machine over a network using HTTP protocol. When the machine is in a remote location, this function can be used in place of the fax function to print a higher quality image than a fax.
  • Page 22 INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER Click the [Custom installation] button. When you are asked how the printer is connected, select [IPP] and click the [Next] button. If a proxy server is used, specify the proxy server and click the [Next] button. To specify a proxy server, select [Print via the proxy server] and then enter the [Address] and [Port number].
  • Page 23 Enter the machine's URL and click the [Next] button. Enter the URL in the following format: Normal format: http://<the machine's domain name or IP address>:631* *1 Normally "631" should be entered for the port number. If the IPP port number has been changed on the machine, enter the new port number.
  • Page 24: When The Machine Will Be Connected With A Usb Cable

    INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER WHEN THE MACHINE WILL BE CONNECTED WITH A USB CABLE Supported operating systems: Windows 98/Me/2000 Vista /Server 2008 * Administrator's rights are required to install the software. • Make sure that a USB cable is not connected to your computer and the machine.
  • Page 25 Click the [Custom installation] button. When you are asked how the printer is connected, select [Connected to this computer] and click the [Next] button. When you are asked if you wish to install the display fonts, select an answer and click the [Next] button. INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER...
  • Page 26 INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER Follow the on-screen instructions. Read the message in the window that appears and click the [Next] button. When the installation completed screen appears, click the [OK] button. • If you are using Windows Vista/Server 2008 If a security warning window appears, be sure to click [Install this driver software anyway].
  • Page 27 Installation of the PCL6 printer driver begins. When the "Found New Hardware Wizard" appears, select [Install the software automatically (Recommended)], click the [Next] button, and follow the on-screen instructions. • If you are using Windows Vista/Server 2008 If a security warning window appears, be sure to click [Install this driver software anyway].
  • Page 28 INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER When installing the PCL5c printer driver, PS printer driver, PPD driver, or PC-Fax driver Installation is possible even after the USB cable has been connected. When the software selection screen appears in step 6 of "OPENING THE SOFTWARE SELECTION SCREEN (FOR ALL SOFTWARE)"...
  • Page 29 When you are asked how the printer is connected, select [Connected to this computer] and click the [Next] button. When the port selection window appears, select the port that the PCL6 printer driver is using (USB001, etc.) and click the [Next] button. When the printer driver selection window appears, remove the [PCL6] checkmark and select the printer driver to be installed, and then click the [Next] button.
  • Page 30 INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER Select whether or not you wish the printer to be your default printer and click the [Next] button. If you are installing multiple drivers, select the printer driver to be used as the default printer.
  • Page 31 This completes the installation. • After installation, see "CONFIGURING THE PRINTER DRIVER FOR THE OPTIONS INSTALLED ON THE MACHINE" (page 35) to configure the printer driver settings. • Make sure that the port of the installed driver is the same as the port used by the PCL6 printer driver.
  • Page 32: Using The Machine As A Shared Printer

    INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER USING THE MACHINE AS A SHARED PRINTER If you are going to use the machine as a shared printer on a Windows network with the printer driver or the PC-Fax driver installed on a print server, follow the steps below to install the printer driver or the PC-Fax driver on the client computers.
  • Page 33 Click the [Printer Driver] button. To install the PC-Fax driver, click the [PC-Fax Driver] button on the "Disc 2" CD-ROM. *The above screen appears when using the "Disc 1" CD-ROM. Click the [Custom installation] button. Select [Shared Printer] and click the [Next] button. INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER...
  • Page 34 INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER Select the printer name (configured as a shared printer). (1) Select the printer name (configured as a shared printer on a print server) from the list. If you are using Windows 98/Me/NT 4.0/2000/XP/Server 2003, you can also click the [Add Network Port] button displayed below the list and select the printer to be shared by browsing the network in the window that appears.
  • Page 35: Using The Standard Windows Ps Printer Driver (Windows 98/Me/Nt 4.0)

    USING THE STANDARD WINDOWS PS PRINTER DRIVER (Windows 98/Me/NT 4.0) If you wish to use the standard Windows 98/Me/NT 4.0 PS printer driver, follow the steps below to install the PPD driver using the Add Printer Wizard. • If you are using the MX-C310/C380/C400, the PS3 expansion kit is required to use the PPD driver.
  • Page 36 INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER Installing the resident font information (Windows 98/Me) If you have installed the PPD driver on Windows 98/Me and will be using the resident fonts in the machine, you must install the resident font information. Follow the procedure below to install the resident font information.
  • Page 37: Configuring The Printer Driver For The Options Installed On The Machine

    CONFIGURING THE PRINTER DRIVER FOR THE OPTIONS INSTALLED ON THE MACHINE After installing the printer driver, you must configure the printer driver settings appropriately for the options that have been installed and the size and type of paper loaded in the machine. Follow the steps below to configure the printer driver.
  • Page 38 INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER Click the [Auto Configuration] button. The settings are automatically configured based on the detected machine status. *The screen shows the PCL6 printer driver. Configure the image of the machine. An image of the machine is formed in the printer driver configuration window based on the options that are installed.
  • Page 39 Click the [OK] button in the printer properties window. If automatic configuration fails, configure the settings manually. • You can check the options that are installed and the tray settings by printing out the "All Custom Setting List" in the system settings of the machine. (However, note that "Input Tray Options"...
  • Page 40 INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER When the PPD driver is installed Click the [Start] button ( [Printer]. • In Windows XP/Server 2003, click the [start] button and then click [Printers and Faxes]. • In Windows 98/Me/NT 4.0/2000, click the [Start] button, select [Settings], and then click [Printers].
  • Page 41 Configure the printer driver for the options installed on the machine. (1) Click the [Device Settings] tab. In Windows 98/Me, click the [Device Options] tab. (2) Configure each item based on the machine configuration. The items and the procedures for configuring the items vary depending on the operating system version.
  • Page 42: Installing The Printer Status Monitor

    INSTALLING THE PRINTER STATUS MONITOR Printer Status Monitor is a printer utility that allows general users to check the current status of the machine on their computer screen, such as whether or not the machine is ready to print. The Printer Status Monitor shows error information such as paper misfeeds, printer configuration information (whether or not a finisher is installed, etc.) as an image, the paper sizes that can be used, and the amount of paper remaining.
  • Page 43 For the procedures for using the Printer Status Monitor, see the Help file. Follow these steps to view the Help file: Click the Windows [start] button, select [All Programs] ([Programs] in Windows 98/Me/NT 4.0/2000), select [SHARP Printer Status Monitor] and then select [Help]. INSTALLING THE PRINTER STATUS MONITOR...
  • Page 44: Installing The Scanner Driver

    INSTALLING THE SCANNER DRIVER The scanner driver (TWAIN driver) can only be used when the machine is connected to a network. When the scanner driver is installed, PC scan mode of the image send function can be used. Supported operating systems: Windows 98/Me/2000 Vista /Server 2008 * Administrator's rights are required to install the software.
  • Page 45 The IP address of the machine is configured in the scanner driver using "Select Device". Click the [start] button, select [All Programs] ([Programs] in Windows 98/Me/2000), select [SHARP MFP TWAIN V], and then select [Select Device]. Click the [Search] button.
  • Page 46 INSTALLING THE SCANNER DRIVER Select the IP address of the machine from the "Address" menu and click the [OK] button. • Be sure to ask your system administrator (network administrator) for the IP address of the machine. • The name (host name) or IP address of the machine can be directly entered in "Address".
  • Page 47: Installing The Ps Display Fonts (Mx-C310/C380/C400)

    INSTALLING THE PS DISPLAY FONTS (MX-C310/C380/C400) Fonts that can be used by the PS printer driver are contained on the "PRINTER UTILITIES" CD-ROM that accompanies the PS3 expansion kit. Install these fonts as needed for the PS printer driver. Insert the "PRINTER UTILITIES" CD-ROM that accompanies the PS3 expansion kit into your computer's CD-ROM drive.
  • Page 48 INSTALLING THE PS DISPLAY FONTS (MX-C310/C380/C400) Click the [PS Display Font] button. Follow the on-screen instructions. Click the [Close] button in the screen of step 6.
  • Page 49: Changing The Port

    CHANGING THE PORT When using the machine in a Windows environment, follow the steps below to change the port when you have changed the IP address of the machine or have installed the PC-Fax driver when the machine is connected with a USB cable. Click the [Start] button ( [Printer].
  • Page 50 CHANGING THE PORT Adding or changing a port. (1) Click the [Ports] tab. In Windows 98/Me, click the [Details] tab. (2) Click the [Add Port] button. To change to a previously created port such as USB port, select the desired port (USB001, etc.) from the list and click the [Apply] button.
  • Page 51 Create the new port. (1) Enter the machine's IP address. ☞ Checking the IP address of the machine (page 7) (2) Make sure that [LPR] is selected. (3) Make sure that [lp] is entered. (4) Click the [OK] button. Click the [Close] button in the screen of step 4. In Windows 98/Me, this step is not required.
  • Page 52: Setup In A Macintosh Environment

    SETUP IN A MACINTOSH ENVIRONMENT This chapter explains how to install the PPD file to enable printing from a Macintosh and how to configure the printer driver settings. ☞ MAC OS X: this page (v10.2.8, v10.3.9, v10.4.11, v10.5 - 10.5.1) ☞...
  • Page 53 Double-click the folder corresponding to the versions of the operating system. v10.2.8 v10.4.11 Double-click the [MX-PBX1] icon ( If the "Authenticate" window appears in Mac OS X v10.2.8, enter the password and click the [OK] button. Click the [Continue] button. The License Agreement window will appear.
  • Page 54 MAC OS X Select the hard drive where the PPD file will be installed and click the [Continue] button. Be sure to select the hard drive on which your operating system is installed. Click the [Install] button. Installation begins. If the "Authenticate" window appears, enter the password and click the [OK] button.
  • Page 55 Select [Utilities] from the [Go] menu. • If you are using Mac OS X v10.5 to 10.5.1, click [System Preferences] in the Apple menu ( select [Print & Fax] ( a printer appears, click the • If you are using Mac OS X v10.2.8, select [Applications] from the [Go] menu.
  • Page 56 MAC OS X Configure the printer driver. • The procedure for configuring the printer driver varies depending on the operating system version. The procedure for versions 10.4.11 and 10.5 - 10.5.1 and the procedure for other versions are explained separately below. •...
  • Page 57 (3) Select the PPD file of the machine. • If you are using Mac OS X v10.3.9, select [Auto Select]. • If you are using Mac OS X v10.2.8, select [Sharp] and click the PPD file of your model. (4) Click the [Add] button.
  • Page 58 MAC OS X Display printer information. (1) Click the machine's name. If you are using Mac OS X v10.5 to 10.5.1, click the [Options & Supplies] button, click the [Driver] tab and go to step 16. (2) Click [Show Info]. If you are using Mac OS X v10.2.8, select [Show Info] from the [Printers] menu.
  • Page 59 MAC OS X (4) Click to close the window. You can check the options that are installed on the machine by printing out the "All Custom Setting List" in the system settings. (However, note that "Input Tray Options" must be set to the number of trays on the machine.) The "All Custom Settings List"...
  • Page 60: Mac Os 9.0 - 9.2.2

    (IP address or domain name) and the queue name. Enter "ipp" in "Queue". (3) Select [Sharp] in "Print Using" and click the PPD file of your model. If you are using Mac OS X v 10.5 to 10.5.1, select [Select a driver to use] from "Print Using"...
  • Page 61 • If you are using Mac OS X v10.2.8, enter the address of the machine (IP address or domain name) in "Printer's Address". • Enter "ipp" in "Queue Name". (3) Select [Sharp] in "Printer Model" and click the PPD file of your model. (4) Click the [Add] button.
  • Page 62 MAC OS 9.0 - 9.2.2 If you are using Mac OS 9.0 to 9.2.2, make sure that "LaserWriter 8" has been installed and that the "LaserWriter 8" checkbox is selected Manager" in "Control Panels". If not, install it from the system CD-ROM supplied with your Macintosh computer.
  • Page 63 Read the message in the window that appears and click the [Continue] button. Installation of the PPD file begins. After the installation, a message prompting you to restart your computer will appear. Click the [OK] button and restart your computer. This completes the installation of the software.
  • Page 64 MAC OS 9.0 - 9.2.2 Select the PPD file. (1) Click the PPD file for your model. (2) Click the [Select] button. • If the above dialog box does not appear and you return to the "Chooser" dialog box, follow these steps to select the PPD file manually. (1) Make sure that the machine is selected in the "Select a PostScript Printer"...
  • Page 65 Select the machine configuration. (1) Select the options that are installed on the machine. (2) Click the [OK] button. You can check the options that are installed on the machine by printing out the "All Custom Setting List" in the system settings. (However, note that "Input Tray Options"...
  • Page 66: Troubleshooting

    TROUBLESHOOTING WHEN INSTALLATION WAS NOT SUCCESSFUL This section provides solutions to possible installation problems. See the following table of contents to locate the appropriate page for your question or problem. • The software cannot be installed......64 •...
  • Page 67 Problem Point to check Is the IP address of the machine is machine configured? detected (when connected to a network). Is your computer connected to the same network as the machine? Is the machine power Is your computer connected correctly to the machine? WHEN INSTALLATION WAS NOT SUCCESSFUL Solution...
  • Page 68 WHEN INSTALLATION WAS NOT SUCCESSFUL Problem Point to check The plug Is the machine power and play screen does not appear (USB connection Can your computer use Windows). a USB connection? Solution When a USB cable is connected, make sure the power of the machine is "ON"...
  • Page 69 Problem Point to check The printer Did you connect the driver is not machine to your installed computer before correctly by installing the printer plug and driver? play (USB connection Windows). WHEN INSTALLATION WAS NOT SUCCESSFUL Solution In Windows 2000/XP/Server 2003/Vista, if the machine was connected to your computer with a USB cable before the printer driver...
  • Page 70 WHEN INSTALLATION WAS NOT SUCCESSFUL The printer driver cannot be installed (Windows 2000/XP/Server 2003) If the printer driver cannot be installed on Windows 2000/XP/Server 2003, follow the steps below to check your computer settings. Click the [start] button and then click [Control Panel]. In Windows 2000, click the [Start] button, point to [Settings], and click [Control Panel].
  • Page 71: Removing The Software

    REMOVING THE SOFTWARE To remove the printer driver or software installed using the installer, follow the steps below. Windows Click the [start] button and then click [Control Panel]. In Windows 98/Me/NT 4.0/2000, click the [Start] button, point to [Settings], and click [Control Panel].
  • Page 72 REMOVING THE SOFTWARE Mac OS X Delete the printer that uses the machine's PPD file from the printer list. To show the printer list, see step 11 and 12 of "MAC OS X" (page 50). Delete the PPD file. The PPD file has been copied to the following folder on the startup disk. [Library] - [Printers] - [PPDs] - [Contents] - [Resources] - [en.lproj] Delete the PPD file of the machine from this folder.
  • Page 73 SHARP Corporation makes no warranty of any kind with regard to its content. All information included herein is subject to change without notice. SHARP is not responsible for any loss or damages, direct or indirect, arising from or related to the use of this operation manual.
  • Page 74: Sharpdesk Cd-Rom (For Windows)

    Sharpdesk* (Desktop Document Management Software) ● Network Scanner Tool ● SHARP TWAIN AR/DM (Twain driver) ● * Sharpdesk can only be installed on the number of computers indicated in "Sharpdesk Serial Numbers" on the cover of this manual. If you need to install Sharpdesk on additional computers, please purchase the optional license kit.
  • Page 75: Network Scanner Tool

    ● Saved in Sharpdesk. SHARP TWAIN AR/DM SHARP TWAIN AR/DM imports image data from a Twain interface into a Twain- compliant application. SHARP TWAIN AR/DM has the following features: ● A selected range of the image data can be imported.
  • Page 76: User's Guides For Software Programs

    ● Network Scanner Tool User's Guide ● SHARP TWAIN AR/DM User's Guide ● In addition to explaining how to use the programs, the user's guides also give detailed instructions for installing and setting up the programs. Be sure to read...
  • Page 77: Installing The Software Program

    Internet Explorer in the Readme file (Readme.txt) in the root folder of the "Disc 2" CD-ROM. ● If you intend to install SHARP TWAIN AR/DM, install Network Scanner Tool first. SHARP TWAIN AR/DM cannot be installed alone. ●...
  • Page 78: Installing Sharpdesk And Network Scanner Tool

    Sharpdesk CD-ROM (for Windows) Installing Sharpdesk and Network Scanner Tool Quit any software applications and/or resident programs that are running on your computer. Insert the "Disc 1" CD-ROM into your CD-ROM drive. ● The Sharpdesk installation screen appears. Proceed to step 5. ●...
  • Page 79 For detailed information, see the Sharpdesk Installation Guide and Sharpdesk User's Guide. * Sharpdesk Imaging is a version of Eastman Software's Imaging for Windows Professional Edition that has been customized by the Sharp Corporation. Sharpdesk CD-ROM (for Windows)
  • Page 80: Installing Sharp Twain Ar/Dm

    Sharpdesk CD-ROM (for Windows) Installing SHARP TWAIN AR/DM SHARP TWAIN AR/DM cannot be used in Windows Vista. Quit any software applications and/or resident programs that are running on your computer. Insert the "Disc 1" CD-ROM into your CD-ROM drive. ●...
  • Page 81: Uninstalling The Software Program

    Windows accessory Imaging for Windows. ● Removing SHARP TWAIN AR/DM will not delete the spooler folder which stores image data. Uninstalling the software program from the Control Panel Click "Control Panel" in the "start" menu.
  • Page 83 The explanations in this manual assume that 500-sheet paper feed units (total of four trays) are installed on the MX-C381. For some functions and procedures, the explanations assume that devices other than the above are installed.
  • Page 84 PRINTED IN FRANCE TINSE4203GHZZ...

This manual is also suitable for:

Mx-c380Mx-c311Mx-c310Mx-c401Mx-c400

Table of Contents