Setting Up Anynet; Switching Between Anynet+ Devices; Recording - Samsung 450 series User Manual

Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
I
Anynet+ Menu Description
I
View TV Changes Anynet+ mode to TV broadcast mode.
Device List
Shows the Anynet+ device list.
(device_name) MENU Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of
the DVD recorder will appear.
(device_name) INFO Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the
play menu of the DVD recorder will appear.
Recording: (*recorder)
Starts recording immediately using the recorder. (This is only available for devices that
support the recording function.)
Stop Recording: (*recorder) Stops recording.
Receiver Sound is played through the receiver.
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is
connected, it will be represented as (*device_name).
I
Setting Up Anynet+
(8
MENU
rm
~
Application
~
Anynet+ (HDMI-CEC)
-4
ENTER
~
• Setup
Anynet+ (HDMI-CEC) (Off IOn): To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.
~ When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.
Auto Turn Off (No
I
Yes): Setting an Anynet+ Device to turn off automatically when the TV is turned off.
~ The active source on the TV must be set to TV to use the Anynet+ function.
~ Even if an external device is still recording, it may turn off.
I
Switching between Anynet+ Devices
1. Anynet+ devices connected to the TV are listed.
~ If you cannot find a device you want, press the red button to refresh the list.
2. Select a device and press the ENTER
~
button. You can switch to the selected device.
~ Only when you set Anynet+ (HDMI-CEC) to On in the Application menu, the Device List menu appears.
• Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching
operation.
• If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function.
Make sure to switch to an Anynet+ device by using the Device List.
I
Recording
You can make a recording of a TV Program using a Samsung recorder.
1. Select Recording.
~ When there are more than two recording devices
• When multiple recording devices are connected, the recording devices are listed. Select one recording deVice in
the Device List.
~ When the recording device is not displayed, select Device List and press the Red button to search devices.
2. Press the EXIT button to exit.
~ You can record the source streams by selecting Recording: (device_name).
~ Pressing the
00
(REC) button will record whatever you are currently watching. If you are watching video from
another device, the video from the device is recorded.
~ Before recording, check whether the antenna jack is properly connected to the recording device. To properly
connect an antenna to a recording device, refer to the recording device's users manual.
English
29
o