Samsung 450 series User Manual page 15

~
Move
[3l
Enter
~
Return
Picture Options
16:9, Zoom1 ,
Zoom2, 4:3
PietureSizel
16:9,4:3
16:9, 4:3, Wide Fit,
Screen Fit
PC
ATV, AV,
Component (480i, 480p)
DTV(1080i),
Component (1080i, 1080p),
HDMI (720p, 1080i, 1080p)
~
Input.,SOuroe
• After selecting
Screen Fit
in HDMI (1 080i/1 080p) or
Component (1 080i/1 080p) mode, you may need to
center the picture:
1. Press the .... or
~
button to select Position.
2.
Press the
ENTER
~
button.
3. Press the
A, .,., ....
or ~ button to move the
picture.
4. Press the
ENTER~
button.
5.
Press the .... or ~ button to select
Reset.
6.
Press the
ENTER
~
button.
• HD (High Definition): 16:9 - 1 080i/1 080p (1920x1 080),
720p (1280x720)
• Settings can be adjusted and stored for each
external device you have connected to an input on
the TV.
• Digital Noise Filter (Off / Low / Medium / High / Auto
/ Auto Visualization):
If the broadcast signal received by
your TV is weak, you can activate the Digital Noise Filter
feature to reduce any static and ghosting that may appear
on the screen.
~ When the signal is weak, try other options until the
best picture is displayed.
Auto Visualization: When changing analog channels,
displays the intensity of the current signal and defines
the screen NR.
~ Only available for analog channels.
• MPEG Noise Filter (Off / Low / Medium / High /
Auto): Reduces MPEG Noise of the picture.
~ Disabled under PC mode.
• HDMI Black Level (Normal/Low):
Selects the black
level on the screen to adjust the screen depth.
~ Available only in HDMI mode (RGB signals).
~l
: Normal
; 16:9
: Auto
: Auto
: Normal
: Off
: 2 hours
Picture 0 tions
Size
Digital Noise filter
MPEG Noise Filter
HOM' Black level
Film Mode
Auto Protection Time
I
Color Tone
~ In PC mode, you can only make changes to the Color
Tone, Size and Digital Noise Filter.
~
MENU
[I]]
~
Picture
~
Picture Options
~
ENTER~
• Color Tone (Cool/Normal / Warm1 / Warm2)
~ Warm1 or Warm2 will be deactivated when the
picture mode is
Dynamic.
~ Settings can be adjusted and stored for each
external device connected to an input on the TV.
• Size: Your cable box/satellite receiver
may have its own set of screen sizes as
well
0
However, we highly recommend
you use 16:9 mode most of the time.
16:9:
Sets the picture to 16:9 wide
mode.
Zoom1:
Use for moderate magnification.
Zoom2:
Use for a stronger magnification.
Wide Fit:
Enlarges the aspect ratio of the picture to fit
the entire screen
0
4:3: Sets the picture to basic (4:3) mode.
~ Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and center
of the screen may cause image retention (screen
burn) which are not covered by the warranty.
Screen Fit: When receiving HDMI (720p/1 080i/1 080p),
Component (1 080i/1 080p) or DTV (1 080i) signals, use
this function to see the full image without any cutoff.
~ NOTE
• After selecting Zoom1, Zoom2 or Wide Fit:
1.
Press the ~ button to select
Position.
2.
Press the
ENTER
~
button.
3. Press the A or .,. button to move the picture up
or down.
4. Press the ENTER
~
button.
5. Press the ~ button to select
Reset.
6. Press the ENTER
~
button to reset the picture
to its default position.
English
15