Aligning The Drawer Front; Install The Base Cover With The Ventilation Slits - Miele KFN 9855 iDE Operating And Installation Instructions

Installing the Appliance

Aligning the drawer front

You can adjust the fronts of the freezer
drawers if necessary.
Side view of the freezer drawer
pulled out
^ On both sides, remove the screws
and put them in the long holes below.
^ Align the drawer front.
^ Then tighten the screws.
82
Install the base cover with the
ventilation slits
^ Remove the lower freezer drawer.
^ Remove the blue protective film from
the supplied air filter.
^ Insert the air filter into the opening in
the base. Push the latch down and
engage it.
^ Remove the locking pins from the
supplied retainers.