Tuner Operation; Direct Access Tuning; Frequency Step Setting - Kenwood KDC-MP338 Instruction Manual

Tuner Operation
Function of remote control
Direct Access Tuning
Entering the frequency and tuning.
1
Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote
control.
"- - - -" is displayed.
2
Enter the frequency
Press the number buttons on the remote
control.
Example:
~,',.,',
. '
~%
" • •
~ ' _
• • " , '
l$i"" " , . ' , " " , "
_ - - : } ~ .
92.1 MHz (FM) [0], [9], [2], [1]
810 kHz (AM)
[0], [8], [1], [0]
Cancelling Direct
Access
Tuning
Press the [DIRECT] button on the remote
control.
Q
~
• You can enter the FM band frequency in steps of a
minimum of 0.1 MHz.
Function of KDC-MP40BU
Frequency Step Setting
Changing the tuning frequency step.
The original setting is FM band 50 kHz.
1
Turn the power OFF
Press the [SRC] button for at least 1 second.
2
Switch the frequency step
While pressing the [1] and [5] buttons, press the
[SRC] button.
Release your fingers from the bunon after the
display appears.
The frequency step changes to FM band 200 kHz.
@2
• When the same operation is repeated, the frequency
step returns to the original setting.
• When the frequency step is changed. the frequencies in
the memory are deleted.
English
I
9