Menu Operation; Menu System; Activating Security Code - Kenwood KDC-MP338 Instruction Manual

Menu Operation
Set up the following functions;
Menu System
"SECURITY
Referto
SET"/ page 12
"SECURITY
CLR"
"CLOCK Refer to
ADJUST" page 13
"DISPLAY" ON*/OFF
"DIMMER" AUTO*/OFF
*1,2,3
"DIMMER"*4 ON/OFF*
"DOT LINE" OW/OFF
"SWPRE"*1.4 REAR*/
SUB-W
"AMP"*1,2
OW/OFF
"AMS
Refer to
CONTROl"*1 page 13
"ZONE2"*1,2,J REAR*/
FRONT
"SUPREME" OW/OFF
"CRSC' OFF/ON*
"NAME SET" Refer to
page 14
"SCROll" AUTO*/
MANUAL
"RECEIVE Refer to
MODE" page 14
"ESN"
Sets the clock,
m
Turns off the display when no
operation is performed,
Dims the display in conjunction
m
with the light switch of the
vehicle.
Adjusts the brightness of
the display according to the
surrounding illumination,
Specifies whether to display the
m
red dotted line on the display.
Sets the preout output.
m
Turns on/off the built-in amplifier.
m
Controls the connected LX
amplifier.
Specifies the destination of AUX
(]iJ
input sound when the Dual Zone
function is tu rned on.
Turns ON/OFF the Supreme
function.
Switches to Monaural to decrease
liD
noise when reception is poor.
Sets the display when switched
r.tm3
to AUX source,
Specifies whether the text is
scrolled automatically.
Sets the receive mode of HR radio.
GIED
Displays the Electronic Serial
Number of satellite radio.
source to which the item is displayed.
(]iJ:
Can be set in other than standby state.
m :
Can be set in standby state.
. . : Can be set while Audio file source of CD/USB
(excluding iPod).
liD:
Can be set during FM reception.
Em:
Can be set during Satellite radio source.
r.tm3 :
Can be set while accessing AUX source.
GIED:
Can be set while HD Radio source.
- : Can be set during all sources.
1
Enter Menu mode
Press the [MJOG] button for at least 1 second.
"MENU" is displayed.
2
Select the menu item
Push the Control knob towards up or down.
3
Set the menu item
Push the Control knob towards right or left.
4
Exit Menu mode
Press the [MJOG] button.
~
• Refer to the respective page for information on how to
set the items with reference page number.
• "ZONE2"is displayed when "2Z0NE"in <Audio Setup>
(page
7)
is set to "ON.
• Refer to the <Appendix> (page
16)
for the details of the
menu items,
• Strong electrical fields (such as from power lines) may
cause unstable sound quality when CRSC is turned ON.
In such a situation, turn it OFF.
Activating Security Code
• You can set the Security Code with a 4 digit number of your
choice.
• The Security Code cannot be displayed or referenced, Make
a note of the Security Code and treasure it up,
"AUX"
-OF-F/O-N-1*-/ Sets whether to display AUX
m
1
Select Security Code item during Menu mode
ON2 during source selection. Select the "SECURITY SET' display.
-"C-D-R-EA-D-"- 1*/2
Sets the CD read mode,
m
For how to select menu items, refer to <Menu
"DEMO Refer to Specifies whether to enable System>(page 12).
MODE" page 14 demonstration.
2
Enter Security Code mode
*Factory setting
Press the Control knob for at least 1 second.
*1 Function of KDC-X492. When "ENTER" is displayed, "CODE" is also displayed.
*2 Function of KDC-MP438U.
3
Select the digits to enter
*3 Function of KDC-MP408U.
*4 Function of KDC-MP338. Push the Control knob towards right or left.
Displayed item is depending on currently selected
4
Select the Security Code numbers
source, The mark in Source column shows the Push the Control knob towards up or down.
12
I
KDC-X492/KDC-MP438U/KDC-MP408U/KDC-MP338