Package Contents - DeWalt D25501 Instruction Manual

Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual
before use.
Wear ear protection.
Wear eye protection.
Clutch Setting 40 Nm is designed for
most drilling applications
40 Nm
Clutch Setting 80 Nm is designed for
80 Nm
higher torque applications
Red service indicator LED. For detailed
description see under Service Indicator
LED's.
Yellow service indicator LED. For detailed
description see under Service Indicator
LED's.
DATE CODE POSITION (FIG. 1)
The Date Code (w), which also includes the year of
manufacture, is printed into the housing.
Example:
2010 XX XX
Year of Manufacture

Package Contents

The package contains:
1 Rotary hammer
1 Side handle
1 Kitbox (K-models only)
1 Instruction manual
1 Exploded drawing
Check for damage to the tool, parts or
accessories which may have occurred during
transport.
Take the time to thoroughly read and
understand this manual prior to operation.
Description (fig. 1a, 1b, 2a–c)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
a. Trigger switch (D25501, D25601, D25602,
D25603)
b. Lock-on slider (D25601, D25602, D25603)
c. Side handle
d. Main handle
e. Active vibration control (D25601, D25602,
D25603 )
f. Mode selector switch
g. Electronic speed and impact control dial
(D25601, D25602, D25603 )
h. Clamp wheel
i. Rear side handle position
j. Side handle clamp
k. Steel ring
l. Bush
m. Tool holder
n. Depth rod release button
o. Depth rod
p. Locking sleeve
q. Pin
x. Collar
INTENDED USE
D25501, D25601, D25602, D25603
Your rotary hammer has been designed for
professional rotary drilling and chipping applications.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
These hammers are professional power tools.
DO NOT let children come into contact with the
tool. Supervision is required when inexperienced
operators use this tool.
Soft Start Feature
D25601, D25602, D25603
The soft start feature allows the speed to build
up speed slowly, thus preventing the drill bit from
walking off the intended hole position when starting.
The soft start feature also reduces the immediate
torque reaction transmitted to the gearing and the
operator if the hammer is started with the drill bit in
an existing hole.
ENGLISH
7