Table of Contents
Advertisement
DATE CODE POSITION
The Date Code which also includes the year of
manufacture, is printed into the motor housing.
Example:
2016 XX XX
Year of Manufacture
Package Contents
The package contains:
1 Diamond drilling machine
1 Open ended spanner, 32 mm
1 Open ended spanner, 41 mm
1 Hose with tap
1 Instruction manual
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fig. 1, 2)
WARNING: Never modify the power
tool or any part of it. Damage or personal
injury could result.
FIG. 1
A. On/off switch
B. Overload warning indicator LED
C. Three gear selector
D. Spindle
E. Water supply fitting
OPTIONAL ACCESSORIES (FIG. 2)
F. D215854 Set of copper rings (5 pcs)
G. D27902 Dust extractor
H. D215851 Drill stand
I. D215824 Water pump
J. D215852 Water collection ring
(for use with D215851)
K. D215853 Spare seal for water collection ring
(3 pcs)
(for use with D215852)
INTENDED USE
Your D21585 diamond drilling machine has been
designed for wet drilling into masonry materials such
as brick, breeze block, etc., as well as engineered
bricks, stone concrete and reinforced concrete
with wet diamond core bits and a water supply.
The machine should not be used for dry drilling
applications.
The machine can only be used on a drill stand.
The machine should never be used in handheld
applications.
DO NOT use under wet conditions or in presence
of flammable liquids or gases.
These diamond drills are professional power tools.
DO NOT let children come into contact with the
tool. Supervision is required when inexperienced
operators use this tool.
• Young children and the infirm. This appliance
is not intended for use by young children or
infirm persons without supervision.
• This product is not intended for use by persons
(including children) suffering from diminished
physical, sensory or mental abilities; lack of
experience, knowledge or skills unless they are
supervised by a person responsible for their
safety. Children should never be left alone with
this product.
Torque Limiting Clutch
This tool is equipped with a torque limiting clutch
that reduces the maximum torque reaction
transmitted to the operator in case of jamming of
a drill bit. This feature also prevents the gearing
and electric motor from stalling. The torque limiting
clutch has been factory-set and cannot be adjusted.
Electronic Overload Protection
(fig. 1)
The electronic overload protection offers additional
safety: if the current approaches a certain limit,
the warning indicator LED (B) lights up to indicate
that the machine switches into overload mode if
operation is continued at the same pressure level.
Reduced operator pressure on the machine makes
the electronics switch back into normal mode.
If continuous overload pressure is applied, the
machine switches off. Thus, overheating of
the motor windings is avoided. The machine is
operational again after the load has been released.
Thermal Protection
After the machine has worked in overload for a
long period of time, the thermal protection shuts
off the machine to protect the motor. The machine
will be operational after the thermal protection has
cooled down. The time of cooling down depends
on the overheating of the motor and the ambient
temperature.
english
27
Advertisement
Table of Contents
