NEC SL1100 Features And Specifications Manual page 527

ISSUE 2.0
System Availability
Terminals
Any Multiline Terminal
Required Component(s)
SL-SYS-MOBILE-1 LIC
Related Features
Abbreviated Dialing/Speed Dial
Caller ID
Direct Inward Dialing (DID)
Direct Inward Line (DIL)
Station Message Detail Recording
Guide to Feature Programming
The programs listed below indicate the most commonly used programs required for this feature. The
programs are listed in the order that the installer should follow. Refer to the PCPro wizards for further
detailed programming.
• When a * is listed next to the Program Number it indicates a program that MUST be set (from a
default state) for this feature to be enabled.
Pro- Program Name/Description
gram
Number
11-02-01 Extension Numbering
* Assign a valid extension number to a port that is not
currently used by existing hardware.
The extension numbers assigned must be within
your valid numbering plan in PRG 11-01-01.
11-13 Service Code Setup (for ACD)
Customize the service codes for ACD.
15-22-01 Mobile Extension Target Setup
* Per Mobile Extension, assigned in PRG 11-02, set
which speed dial bin (PRG 13-04) is to be used
when the Mobile extension is called.
To have access to the Mobile Extensions you must
use the PC Programming tool. In PCPRo go to Pro-
gramming/Unregistered Phones/Mobile Extension
list and add the extension numbers programmed in
PRG 11-02-01.
Features and Specifications Manual
Assigned Data
*
Maximum of 8 digits (0 ~ 9, , #)
(default = Station Port No. 1 ~ 84 = Ex-
tension Number : 101 ~ 184)
Please refer to the SL1100 Programming
Manual for more information.
0 = No Setting
1 ~ 999 = Speed Dial Bin 1 ~ 999 (PRG
13-04)
(default = 0)
SL1100
M
Note
(V1.5 Added)
1-515