Table of Contents
Advertisement
2 - 10 Omnii Hand-Held with Windows CE 6.0 User Manual
To access CAPS LOCK mode, press [FN] + [SHIFT]. In this state, if you press a numeric key, the number is
displayed rather than the normal shifted function of that key. Press [FN] + [SHIFT] again to turn the CAPS
LOCK mode off.
The Keypad Backlight
The intensity of the keypad backlight and the conditions under which this backlight is activated can be config-
ured using the Keyboard icon in the Windows Embedded CE Control Panel. The behaviour of the keypad
backlight is tailored in the Keyboard Properties dialog box. Refer to
details about this option.
NOTE
Keep in mind that this option may be restricted to supervisory use only.
The Display
The Omnii is equipped with display backlighting to improve character visibility in low light conditions. The back-
light switches on when a key is pressed.
Adjusting the Display Backlight
The behaviour of the display backlight and the intensity of the backlight can be specified in the Display Proper-
ties dialog box in the Control Panel.
NOTE
Refer to
dialog box.
Calibrating the Touchscreen
If your Omnii touchscreen has never been calibrated, or if you find that the stylus pointer is not accurate when
you tap on an item, use the Stylus Properties dialog box in the Control Panel to recalibrate the screen.
•
In the Control Panel, choose the Stylus icon to display the Stylus Properties window.
•
Select the Calibration tab, and then choose the Recalibrate button.
•
Follow the directions on the calibration screen to calibrate the screen.
"Backlight" on page 3-24
"Keyboard Backlight" on page 3-33
for details about the Display Properties
for
Advertisement
Table of Contents
Troubleshooting
