Motorola 7545MBW User Manual page 277

Creating a New Profile
Figure G-10
The name of the newly created profile must be different from all existing profiles. Also, the name cannot be
Default. When the New Data Profile dialog box is opened, a proposal for a unique name is filled in the corre-
sponding entry field. If a manually configured profile has a secret password and unauthorized access to the
device is a concern even after the SIM PIN has been entered, the password should not be entered in the New
Data Profile dialog box and the Prompt user for password check box should be checked instead. In this case,
you will be prompted for the password each time a connection is initiated (the Connect Data button in the main
Wireless WAN dialog box is selected).
By default the connection uses PAP (Password Authentication Protocol), a simple authentication protocol used
to authenticate a user to a remote access server or Internet Service Provider. However, if your ISP does not
support PAP, tapping in the box to the left of Force PAP authentication disables PAP and directs the connection
to use CHAP (Challenge Handshake Authentication Protocol) instead.
Reset
The Reset button in the New Profile and Edit Profile dialog boxes resets all entry fields to the values they had
when the dialog box was opened.
Advanced IP
Assigning IP Information
Figure G-11
The Advanced IP button in the Show Profile and Edit Profile dialog boxes opens another dialog box that allows
you to configure a static IP address as well providing DNS and WINS fields so that you can specify DNS and
WINS resolvers.
Wireless Wide Area Network (WWAN) Settings G - 9