Advanced; Advanced Ce Services Settings; Advanced Interface And Network Settings - Motorola 7545MBW User Manual

Advanced

Advanced CE Services Settings

FTP Server
This option is enabled by default to allow file transfers. Keep in mind that data transfer in either direction is
restricted to the Temp folder — that is, data are always loaded from the FTP Server to the Temp folder and
from the Temp folder to the FTP Server.
If this option is disabled, a warm reset must be performed to accept the change.

Advanced Interface and Network Settings

Enable IPv6
This option allows you to enabled Internet Protocol specification, version 6, that has been published to enable
128-bit IP addresses (replacing version 4).
Modem Logging
When this option is enabled, the Omnii logs AT commands (e.g., dial-out information, password string, etc.)
that the administrator can monitor for debugging purposes. Modem commands are stored in: \MdmLog.txt.
Configuration 3 - 73