Table of Contents
Advertisement
DKT/IPT Settings
Telephone Programming Mode
Call Waiting and Camp-on Ring Tone Over Handset/
Headset Option
Call Waiting and Camp-on tones are sent to a busy telephone's speaker to indicate that
a call is waiting. Call Waiting and Camp-on Tones can be sent, as an option, to the
telephone handset or headset, in addition to the speaker. Follow these steps to turn
handset/headset Call Waiting and Camp-on tone On/Off for a DKT3000/3200/3500-
series telephone. The default is Off.
1. Press
2. Press
3. Press Feature Button 4 (FB4) to toggle On/Off.
FB4, LED On: Call Waiting tone
FB4, LED On: No Call Waiting tone
4. Press
5. Go off-hook, then on-hook to exit the program mode.
Reset and Adjust the LCD Contrast
To adjust LCD Contrast for the LCD Telephones
1. Press
2. Press and hold down the
repeatedly.
Each time you press
eight steps in either direction. To return to the middle setting, repeat "Step 1"
above.
3. Press
4. Go off-hook, then on-hook to exit the program mode.
To reset LCD Contrast for the DKT3014-SDL/3214-SDL
1. Press
2. Press
3. Press
12
3
6
9
Hold
+
+
+
(simultaneously).
0
.
Hold
to set the option.
3
6
9
Hold
+
+
+
(simultaneously).
Mic
Vol ▲
Hold
to reset the LCD contrast.
3
6
9
Hold
+
+
+
(simultaneously).
SK1
Mode
/
.
Msg
Msg
so that the
button, and press and release
Vol ▼
or
, the contrast increases or decreases. There are
LED is On.
Strata CIX Telephones Administrator Manual
Vol ▲
Vol ▼
or
06/06
Hide quick links:
Advertisement
Table of Contents
