Telephone Programming Mode; Telephone Program Option Reset - Toshiba Strata CIX IPT Administrator's Manual

DKT/IPT Settings

Telephone Programming Mode

Telephone Programming Mode
The DKT3000/3200/3500-series and IPTs enable you to set a number of features
directly from the phone, including: Call Waiting Tone (On/Off), Flex Key, Msg Key,
LCD contrast, and Speakerphone/Microphone Room Noise Sensitivity (On/Off).
"Telephone Programming Mode" programs settings on a ROM chip inside the
telephone.
Some of the procedures use Feature Buttons (FB1, FB2, etc.). When your
Note
telephone is in Programming Mode, the flexible buttons are numbered as
Feature Buttons, as shown at the beginning of this chapter.
To place your telephone in Programming Mode
Press
MODE" and "SELECT=". Your phone will not ring if it receives a call while in
Programming Mode.
To exit from Programming Mode
Go Off- and On-hook or wait for 30 seconds for Programming Mode to
automatically time out.

Telephone Program Option Reset

This function resets all Programming Mode option settings to their default setting.
1. Press
2. Press
3. Press
4. Go off-hook, then on-hook to exit the program mode.
10
3 6 9 Hold
+ + + simultaneously. The LCD displays "DKT PROGRAM
3 6 9 Hold
+ + + (simultaneously).
Vol ▲
Msg Msg
+ (
Hold
to activate reset.
LED On means reset is set to activate)
Strata CIX Telephones Administrator Manual 06/06