Miele G 800 Series Installation Instructions Manual page 32

Installation
For installations using the included
plastic toekick
^ Insert the mounting bracket with the
flange pointing toward the outside of
the machine.
Push the mounting brackets in as far as
possible by releasing the tension on the
spring clip (see illustration).
32
The included toekick will fit without
modification if the machine is set to its
maximum height and the toekick is
recessed as far as possible (4" / 10
cm).
If the machine height is less than
maximum, or if the toekick is not
recessed 4" (10 cm), the toekick must
be shortened.
The rear of the toekick has two cutting
lines.