Miele G 800 Series Installation Instructions Manual page 25

Existing plumbing:
3
If the standard /
8
a dishwasher already exists with a
compression fitting and valve as
pictured:
^ Cut the
3
/ " copper tubing after the
8
valve.
^ Install the
3
/ " compression to
8
MHT (Male Hose Thread) adapter
(supplied with the machine), as
illustrated.
^ For any other size plumbing, buy the
correct size adapter from a hardware
store.
^ Connect the inlet hose to the existing
valve /adapter assembly.
" copper plumbing for
3
/
4
,
WARNING - Elcetrical Hazard
Do not cut the intake hose. If the
hose is cut, the dishwasher will not
work. There will be a water leak and
you could be injured. If the hose is
too long, coil it neatly and place it
behind the machine.
"
Electrical wiring and components
should not come into contact with
any plumbing fixtures or hoses.
Installation
25