Siemens Liquid-cooled Generators Installation Manuallines page 22

ENABLING & SCHEDULING THE wEEkLY EXERCISE FUNCTION
Use the arrow keys to set the day of the week and time the customer wants
the unit to exercise. Remember to press ENTER to select the field you want to
change and again to save each change.
From the main menu , select "Exercise/HTS" and
press ENTER once to go to page 1 of the section.
If the top line of the display shows "Y Exercise
Enabled", the setting is correct.
If the top line of the display shows "N Exercise
Enabled", you will have to enable the exercise
function. Use the UP or DOWN arrow key to move
the flashing cursor to the "N" on the first line and
press ENTER.
Press the UP or DOWN arrow key to change the
"N" to "Y" and press ENTER to save the setting.
To schedule the weekly exercise function, press
the down arrow key once to scroll to the "Time
Start" line.
ENABLING THE QUIET-TEST FEATURE
To enable Quiet-Test, scroll to the page information
at the bottom of the screen, select the forward
g
arrow (
If the top line of the display shows "N Quiet Test
Selected", you will have to enable the Quiet-Test
feature. Move the cursor to the "N" and
press ENTER.
) to go to page (2 - 4) and press ENTER.