Express Timer Programing - JVC SR-VS30U Instructions Manual

Filename [VS30U_2-EN.fm]
VS30U_2-EN.fm Page 46 Thursday, January 31, 2002 3:38 PM
46
EN
Express Timer
Programing
If you do not know the PlusCode number for the program
you wish to record, use the following procedure to set
your VCR to timer-record the program.
Before performing Express Timer Programing:
Make sure that the VCR's built-in clock is set properly.
Turn on the TV and select the AV mode.
T
1
4
7
1
Page 46
W
2 3
2
5 6
8 9
0
4
DV S-VHS
TIMER RECORDING (cont.)
A
Turn on the VCR.
Press POWER.
B
Load a cassette.
Insert a VHS (or S-VHS) cassette with the record safety
tab intact.
OR
Insert a Mini DV cassette with the erase protection switch
set to "REC".
C
Select the deck.
Press S-VHS or DV.
D
Access the PlusCode screen.
Press PROG.
E
Access the Program screen.
Press START+/–. (If you're
just starting out and you have
selected the VHS deck, "VHS
PROGRAM 1" appears.)
F
Enter the program start time.
Press START+/– to enter the
time you want recording to
start.
Press and hold START+/– to
move in 30-minute
increments, or press and
release repeatedly to move 1
minute at a time.
G
Enter the program stop time.
Press STOP+/– to enter the time you want recording to
stop.
Press and hold STOP+/– to move in 30-minute increments, or
press and release repeatedly to move 1 minute at a time.
Masterpage:Left
January 31, 2002 3:37 pm