Table of Contents
Advertisement
Incase of Emergency
TOWING THE VEHICLE
Towing the Vehicle :
For towing a vehicle, the best
way is to use a towing operator.
Alternatively use a rigid tow bar.
Avoid using a flexible cable or
rope as your vehicle may crash
into the vehicle towing your car
when it stops suddenly.
Switch 'ON' the hazard warning
signals of both vehicles to warn
other road users.
Where possible, keep the
engine idling so that power
steering assistance and brake
vacuum are available.
Limit the speed to 20-30 kmph.
In case of brake failure, use the
parking brake to control the
vehicle.
74
Ofrecido por www.electromanuales.com
Front and
Rear Tow Hook
Location :
Two Hook Location at Front
Two Hook Location at Rear
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Xenon and is the answer not in the manual?
Questions and answers
Only start with quick start all the time
The TATA Motors Xenon may only start with a quick start due to issues related to the immobilizer, BCM (Body Control Module), or ECU (Engine Control Unit). Possible causes include:
1. Immobilizer and BCM Issues – If the IMMO/BCM and ECU are not correctly coded to the vehicle, the immobilizer may prevent normal starting.
2. ECU/PCM Relay Circuit Fault – The P0685-13 fault code suggests an issue with the ECU/PCM power relay control circuit. Even if the relay shows battery voltage, it may fail under load conditions.
3. Secret Code Immobilizer System – The vehicle may remain in an immobilized state if the correct procedure is not followed to re-enter the secret code.
These factors can cause the vehicle to rely on a quick start rather than a normal ignition sequence.
This answer is automatically generated
I have engine ,anti skid lights on why how to solve