Panasonic KX-NCP500 Manual Manual page 271

Item
Date & Time Set
System Password for
Installer
Manager Extension
and Operator
Flexible Numbering—
Feature
Flexible Numbering—
Extension
Flexible Numbering—
Operator
Flexible Numbering—
CO Access
DHCP Client
LAN Connection
*1
Virtual Card
If the DHCP Client setting is set to Enable, this parameter can not be set.
*1
Note that the programmable items may vary depending on the version of Maintenance Console being used.
Document Version 2009-12
Parameter
Year/Month/Date/
Hour/Minute
4–10 characters
Extension Number
1.
Pattern 1
(with )
2.
Pattern 2
(without )
From 101/from 201
0/9
0/1/9
Enable/Disable
•
IP Address for
IPCMPR Card
•
IP Address for
VoIP-DSP
•
Subnet Mask
•
Default Gateway
–
Description
The date and time set on the PC can be used by default.
Enter the system password for installer (®
13.1.3 Password Security).
Assign an extension as a manager extension (®
11.1.1 Manager Features) and an extension as a PBX
operator (® 12.1.5 Operator Features).
Select whether or not the prefix " " must be entered
before dialing feature numbers.
[Example] Call Pickup feature number
Pattern 1 (with ): 41
Pattern 2 (without ): 41
Note that certain feature numbers (Line Access
numbers, Operator Call, etc.) never need this prefix.
For a list of the default flexible numbers, refer to the
[Flexible Numbering Table (available while a dial tone
is heard)] (® 6.1.4 Flexible Numbering/Fixed
Numbering).
Determines the number from which default extension
numbers begin.
The feature number for Operator Call can be selected.
The feature number for Idle Line Access can be
selected.
Determines whether to use a DHCP server to assign IP
address information automatically or not.
Manually enter the LAN information when not using a
DHCP server.
Select whether to install a V-IPEXT, V-SIPEXT, or
V-SIPGW card.
14.1.2 Quick Setup
Feature Manual 271