Pc Console/Pc Phone - Panasonic KX-NCP500 Manual Manual

13.1.5 PC Console/PC Phone

When a pause is needed, pauses must be inserted manually (pressing the PAUSE button) in all cases, except
for the following access codes where a pause is automatically inserted between the user-dialed access code
and the subsequent digits:
a.
Host PBX Access code (® 8.1.5 Host PBX Access Code (Access Code to the Telephone Company from
a Host PBX))
b.
Special Carrier Access code (® 16.1.5 Special Carrier Access Code)
c.
Second Dial Tone Waiting code
Conditions
•
The length of a pause is programmable for each CO line.
•
Numbers stored in Memory Dialing can contain pauses.
•
When a Second Dial Tone Waiting code is dialed after seizing a CO line, a preprogrammed number of
pauses are inserted after the code.
•
ARS
A pause is not automatically inserted between the user-dialed access code and the subsequent digits when
the ARS mode is enabled. (® 1.1.3 ARS (Automatic Route Selection))
PC Programming Manual References
3.28 [1-1] Slot—Port Property - LCO Port—
3.34 [1-1] Slot—Port Property - T1 Port—
4.5 [2-3] Timers & Counters—Miscellaneous—
8.4 [6-4] Second Dial Tone
PT Programming Manual References
[416] LCOT Pause Time
13.1.5 PC Console/PC Phone
Description
Panasonic PC Console/PC Phone is supported by a PC with a KX-DT343/KX-DT346 or KX-T7633/
KX-T7636 DPT (equipped with USB module) through USB ports. By using the KX-TDA0350 PC Phone or
KX-TDA0300 PC Console CTI application, users can enjoy many PBX features while utilizing the benefits of
a CTI solution. PC Console gives users access to certain administrative level features that are not available
with PC Phone.
202 Feature Manual
Pause Time
Pause Time
During Conversation—Pause Signal Time
Document Version 2009-12