Panasonic KX-NCP500 Manual Manual page 25

Note
If a Timed Reminder (Remote Wake-up call) is set:
–
On the Daylight Saving Time start date, a reminder set for between 2:00 A.M. and 3:00 A.M. will
not ring.
–
On the Daylight Saving Time end date, a reminder set for between 1:00 A.M. and 2:00 A.M. will
ring twice.
2.
Time Information from Telephone Company
Time information can be received when
–
An incoming or outgoing call through an ISDN line is received/made.
–
An incoming call through an analog line with Caller ID which includes time information is received.
The PBX clock will be adjusted everyday with the first call after 3:05 AM, if enabled through system
programming.
Note
If a Timed Reminder (Remote Wake-up call) is set, the setting will not ring or will ring twice depending
on the adjustment.
3.
Time Information through Simple Network Time Protocol (SNTP)
By connecting the PBX to an SNTP server, it is possible to receive and update the time setting. The PBX
clock will be adjusted everyday at 3:05 AM, if enabled through system programming.
Conditions
[General]
•
Through system programming, it is possible to specify SNTP, ISDN, or neither method as the selected
method of automatic time adjustment.
•
Station Message Detail Recording (SMDR) will log call information using the PBX clock so that the logging
time will be overlapped at the end of Daylight Saving Time. (® 16.1.3 SMDR (Station Message Detail
Recording))
[SNTP Time Information]
•
The time set through SNTP will apply the same to all PTs and IP-PTs connected to the PBX, regardless if
an IP extension is located in another time zone.
PC Programming Manual References
4.2 [2-1-2] Date & Time—SNTP / Daylight Saving—
4.3 [2-1-2] Date & Time—SNTP / Daylight Saving—Daylight Saving
Feature Manual References
9.1.16 ISDN (INTEGRATED SERVICES DIGITAL NETWORK) FEATURES
17.1.4 Timed Reminder
Document Version 2009-12
1.1.7 Automatic Time Adjustment
Automatic Time Adjustment
Feature Manual 25