Canon imageRUNNER 2545i Easy Operation Manual page 19

>> Send and Fax Functions
This section describes the operation procedures for the
Send and Fax functions you can access from the [Send
Settings] key on the top screen of the Send and Fax
functions.
Adding the Reply Destination to Sent Documents
You can specify the reply-to address for your e-mails/I-faxes.
First, register the e-mail address you want to use as the reply-to
address.
1
Press [Send Settings].
1 2
Press [Reply-to].
Press [▼].
35 Easy Operation Guide Send/Fax
1
Chapter 2❖Sending and Facsimile Guide
3 Select the reply-to address →
press [OK] → [Done].
Specifying the Time to Start Sending
You can specify the time for sending the document. This function is useful, for example, when you want to send a
document at a future time when you may not be near the machine.
1 Press [Send Settings].
Enter the time to send the
1 2
Press [Delayed Send]. document using
(numeric keys) → press [OK].
Affixing Stamps on Scanned Originals
You can set the machine to affix a stamp on the front side of scanned originals to indicate they have been scanned.
† The Stamp mode is available only when the optional Stamp Unit-B1 is attached
to the feeder (optional for the imageRUNNER 2545/2535/2530/2525/2520).
1
Press [Send Settings].
1
Press [Stamp].
Chapter 2❖Sending and Facsimile Guide
3
– Press [Done].
Chapter 3❖Sending and Facsimile Guide
2
Press [Done].
Send and Fax Functions Easy Operation Guide 36