Panasonic KX-TD500 Installation Manual page 262

Utility
Error Code Error Message
#1318 Digital trunk out of sync
#1319 Digital trunk RAI signal
reception
#1320 Digital trunk AIS signal
reception
#1323 Digital trunk frame failure
#1324 Digital trunk multi frame
error
#1325 Digital trunk error rate over The PBX exceeded the number of multiframe errors per
#1328 DSP-1 link failure
#1332 Digital trunk restoration
#1333 Card status fault
#1500 Port link failure
#1501 Free Block error
#1502 Free Block error
#1503 Free Block error
#1504 Free Block error
#1505 Free Block error
#1506 Free Block error
#1507 Free Block error
#1508 Free Block error
#1509 Free Block error
262
Error Log (Minor)
T1 or PRI23 card (physical number XXX) lost the
synchronization with the clock time sent from the Central
Office.
T1 or PRI23 card (physical number XXX) received RAI
(Remote Alarm Indication) signal sent from the Central
Office.
T1 or PRI23 card (physical number XXX) received AIS
(Alarm Indication Signal) signal sent from the Central
Office.
On booting-up of T1 or PRI23 card (physical number
XXX), it failed to synchronize with the clock time sent
from the Central Office.
The PBX detected the multiframe synchronization error
of T1 or PRI23 card.
second which the PBX required to recognize the remote
alarm.
DSP (Digital Signal Processor) link failure of T1 card
occurred.
The status of T1 or PRI23 card is changed from "Fault" to
"INS (In-Service).
Card fault occurred.
The PBX synchronized with the port of VPS (DPT)/
Doorphone (TXXXXX: Physical port no.) in vain.
The internal memory was depleted. (Memory #1)
The internal memory was depleted. (Memory #2)
The internal memory was depleted. (Memory #3)
The internal memory was depleted. (Memory #4)
The internal memory was depleted. (Memory #5)
The internal memory was depleted. (Memory #6)
The internal memory was depleted. (Memory #7)
The internal memory was depleted. (Internal error #1)
The internal memory was depleted. (Internal error #2)
Cause
Installation Manual