Panasonic KX-TD500 Installation Manual page 229

[Card/Port Test] PT Path Test – Operation
(Continued from step 5 of [Card/Port Test] – Operation (General).)
a)
Point to
• "PT Path Test" screen is displayed.
b)
Specify the port number to be tested, or select "All."
• If you select "All," all ports on the selected card will be tested at a time.
c)
Click
• After executing the test, the test result is displayed.
Item
Card
Port No.
Result
Details
Installation Manual
PT Path Test
in the "Card/Port Test Menu" screen and click.
.
Example: When a DLC card is installed in the Slot No. 101.
[Card/Port Test] PT Path Test - Description
Display/Input Value
Card No.: Type
1-8/16/all
OK
NG
See "Error Indication
Table."
Description
The card number and the type of the target
card to be diagnosed. (The card specified in
"Card Information" screen is displayed
automatically.)
Used to specify the port number of the
extension card to be diagnosed.
The results of diagnosis.
The details of an error.
Displayed only when Result is NG (no
good).
Utility
229