T1 Digital Trunk Card (Kx-T96187) - Panasonic KX-TD500 Installation Manual

Installation

2.5.4 T1 Digital Trunk Card (KX-T96187)

Short Jumper Setting
Before installing the T1 digital trunk card into the KX-TD500 system, make sure that the short
jumper (SW5) is set to the "TD500" side. Otherwise, the T1 digital trunk card will not work
with the KX-TD500 system.
Jumper Position
• Insert this card into a free slot 1, 5 or 9. Otherwise, this card will not function.
• One T1 Digital Trunk card occupies two slots. If you assign a T1 Digital Trunk card to
FS01, FS02 is not available for other cards.
• A maximum of eight KX-T96187 cards can be installed in the system.
• T1 Digital Trunk card must be installed behind an FCC registered and UL or CSA-NRTL
listed CSU.
128
T336 Mode for KX-T336
TD500 Mode for KX-TD500 (default)
KX-T96187
Make sure that the jumper switch is connected as above.
Explanation
SW5
Installation Manual