Panasonic KX-TD500 Installation Manual page 218

Utility
[Card/Port Test] Card Test – Operation
(Continued from step 5 of [Card/Port Test] – Operation (General).)
a)
Point to
• "Card Test" screen is displayed.
b)
Click
• After executing the test, the test result is displayed.
Notes
• After executing (or canceling) the Card Test, go back to "Diagnosis - Card
• Executing the DISA card test erases the pre-recorded OGM and a beep tone will
• When executing the T1 card test, set the DIP Switch on the T1 card to "TEST"
Item
Card
Result
Details
218
in the "Card/Port Test Menu" screen and click.
.
Example: When a DLC card is installed in the Slot No. 101.
Information" screen by pressing
"OUS (Out-of-Service)" to "INS (In-Service)."
be recorded automatically instead of the OGM.
position.
[Card/Port Test] Card Test - Description
Display/Input Value
Card No.: Type
OK
NG
See "Error Indication
Table."
button and change the card status from
Description
The card number and the type of the target
card to be diagnosed. (The card specified in
"Card Information" screen is displayed
automatically.)
The results of diagnosis.
The details of an error.
Displayed only when Result is NG (no
good).
Installation Manual