Connecting Peripherals
Topics in this chapter:
Overview of Peripheral Connections
Connecting the Graphics Monitor
Connecting the Keyboard, Mouse, and Tablet
Connecting the Graphics Monitor Calibration Device
Network Connections
Connecting the Autodesk Control Surface to a Lustre Workstation
Connecting the Slave Renderer to a Lustre Workstation
Overview of Peripheral Connections
The following diagram provides an overview of the adapter card positions, and illustrates how to connect
peripherals, such as the graphics monitor, keyboard, mouse, Wacom Intuos pen tablet, and house network,
to the HP xw8600 workstation.
It is recommended you connect all hardware peripherals, as instructed in this chapter, before booting the
workstation for the first time.
on page 13
on page 14
on page 16
on page 15
on page 15
on page 17
on page 19
3
13