Summary
Workflow for Connecting Peripherals
You must connect peripherals (monitor, keyboard, mouse, storage, and network) to each Lustre
workstation before you connect the workstations to video I/O, a control surface, or to other
components in the workgroup.
Connect all hardware peripherals before you boot your workstation.
See the following table for a summary of the steps necessary to connect peripherals to your
Lustre workstation.
Step:
1. Review the connection diagram for your workstation.
2. Connect a monitor to the workstation.
3. Connect a keyboard, mouse, and calibration device to
your workstation.
4. Connect the workstation to storage.
Connecting Peripherals
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
. . . . . . . . . 18
Refer to:
"Connection Diagram for the HP
xw8400"
on page 16.
"Connecting the Monitor"
on page
17.
"Connecting the Keyboard, Mouse,
and Monitor Calibration Device"
page 18.
"Connecting Storage"
on page 18.
on
15